SKF SY 504 M Plummer Block House -, 47 mm ID

RS-stocknr.:: 213-2049
Fabrikantnummer:: SY 504 M
Fabrikant:: SKF

SKF SY 504 M Plummer Block House -, 47 mm ID

Bekijk deze categorie

Subtotaal (1 eenheid)*

€ 20,10

(excl. BTW)

€ 24,32

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

12 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 20,10

*prijsindicatie

RS-stocknr.:: 213-2049
Fabrikantnummer:: SY 504 M
Fabrikant:: SKF

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SKF
	Product Type	Plummer Block House
	Inside Diameter	47mm
	Material	Cast Iron
	Centre Height	33.3mm
	Mount Hole Size	11.5 mm
	Length	219mm
	Depth	32mm
	Mount Hole Centre-to-Centre	97mm
	Number of Bolts	2
	Height	64.5mm
	Series	SY
	Standards/Approvals	No

	Alles selecteren
	Merk SKF
	Product Type Plummer Block House
	Inside Diameter 47mm
	Material Cast Iron
	Centre Height 33.3mm
	Mount Hole Size 11.5 mm
	Length 219mm
	Depth 32mm
	Mount Hole Centre-to-Centre 97mm
	Number of Bolts 2
	Height 64.5mm
	Series SY
	Standards/Approvals No

Land van herkomst:: IT

SKF Plummer Block House, Y Bearing Type, 47mm ID, 127mm Length - SY 504 M

Use this plummer block house from SKF in your rotating machinery to handle heavy loads moving in different directions. Once mounted with a compatible bearing insert (233-7245), the unit can accommodate a static load of 6.55kN and a dynamic load of 12.7kN at speeds up to 8,500rpm for use in heavy-duty applications. Its cast-iron body is resistant to corrosion, so it won't degrade in damp conditions. For a secure fit, you can install the housing directly onto the support surfaces in your system with two 10mm bolts and two 2mm dowel pins.

• Relubrication hole for ease of maintenance

• Slim dimensions of 127 (L) x 32 (W) x 33.3mm (H) to save space in compact setups

• Light weight of 0.41kg to place minimal strain on your equipment

Applications

• Manufacturing facilities

• Agricultural equipment

• Packaging machinery

What thread size does the grease fitting have?

This unit's grease fitting has a 1/4-28 SAE-LT thread, making it compatible with standard relubrication equipment.

Should I use an end cover with this housing?

Yes, you can use an end cover (339-8849) with this product to keep the shaft in place and prevent contact between rotating ends.