NSK-RHP PNP25CR Pillow Block Bearing -, 25 mm ID
- RS-stocknr.:
- 232-8625
- Fabrikantnummer:
- PNP25CR
- Fabrikant:
- NSK-RHP
Afbeelding representeert productcategorie
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 92,07
(excl. BTW)
€ 111,40
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 12 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 92,07 |
| 5 - 9 | € 88,39 |
| 10 - 24 | € 86,55 |
| 25 + | € 84,70 |
*prijsindicatie
- RS-stocknr.:
- 232-8625
- Fabrikantnummer:
- PNP25CR
- Fabrikant:
- NSK-RHP
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | NSK-RHP | |
| Product Type | Pillow Block Bearing | |
| Inside Diameter | 25mm | |
| Material | Bearing Ring | |
| Static Load Rating | 5350N | |
| Centre Height | 36.5mm | |
| Mount Hole Size | 11 mm | |
| Length | 140.2mm | |
| Depth | 37.8mm | |
| Mount Hole Centre-to-Centre | 104.9mm | |
| Standards/Approvals | NSF grade H1 | |
| Height | 71.9mm | |
| Limiting Speed | 9910rpm | |
| Alles selecteren | ||
|---|---|---|
Merk NSK-RHP | ||
Product Type Pillow Block Bearing | ||
Inside Diameter 25mm | ||
Material Bearing Ring | ||
Static Load Rating 5350N | ||
Centre Height 36.5mm | ||
Mount Hole Size 11 mm | ||
Length 140.2mm | ||
Depth 37.8mm | ||
Mount Hole Centre-to-Centre 104.9mm | ||
Standards/Approvals NSF grade H1 | ||
Height 71.9mm | ||
Limiting Speed 9910rpm | ||
N.v.t.
Self-Lube Pillow Block Bearing - Corrosion Resistant
Designed specifically for use in industries where frequent thorough wash-downs are necessary, optimum hygiene standards are required and chemical resistance is important over a wide temperature range.
Available in pillow block, two bolt flange configurations and are capable of accomodating initial misalignment whilst mounting
Relubrication is possible through the grease nipple and all units are charged with USDA H1 approved food grade grease as standard
Polypropylene and caps are also available for additional protection to the bearing
Gerelateerde Links
- NSK-RHP NP25EC Pillow Block Bearing -, 25 mm ID
- NSK-RHP SL25 Pillow Block Bearing -, 25 mm ID
- NSK-RHP MP25 Pillow Block Bearing -, 25 mm ID
- NSK-RHP NP25 Pillow Block Bearing -, 25 mm ID
- NSK PNP25CR Plummer Block Bearing Unit -, 25 mm ID
- NSK-RHP SNP25 R Pillow Block Bearing -, 25 mm ID
- NSK-RHP LPB25 R Pillow Block Bearing -, 25 mm ID
- NSK-RHP NP2 Pillow Block Bearing -, 50.8mm ID