Norgren Pneufit C Series Banjo In-line Regulator, C0K51, Inlet Male, Threaded G 1/2 16 mm Push-in Fitting 16 mm

RS-stocknr.:: 212-9228
Fabrikantnummer:: C0K511248
Fabrikant:: Norgren

Norgren Pneufit C Series Banjo In-line Regulator, C0K51, Inlet Male, Threaded G 1/2 16 mm Push-in Fitting 16 mm

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 36,31

(excl. BTW)

€ 43,94

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

10 stuk(s) klaar voor verzending vanaf een andere locatie

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 - 4	€ 36,31
5 - 9	€ 34,85
10 +	€ 33,40

*prijsindicatie

RS-stocknr.:: 212-9228
Fabrikantnummer:: C0K511248
Fabrikant:: Norgren

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Norgren
	Outlet Connection Type	Push-in Fitting
	Product Type	In-line Regulator
	Inlet Connection Type	Threaded
	Sub Type	Banjo
	Inlet Connection Size	16 mm
	Outlet Connection Size	16 mm
	Series	Pneufit C
	Inlet Thread Standard	G 1/2
	Inlet Port Gender	Male
	Maximum Operating Pressure	10 bar
	Minimum Operating Temperature	0°C
	Material	Polybutylene Terephthalate
	Maximum Operating Temperature	60°C
	Standards/Approvals	No
	Hazardous Area Certification	No
	Minimum Operating Pressure	-0.9bar
	Model Number	C0K51

	Alles selecteren
	Merk Norgren
	Outlet Connection Type Push-in Fitting
	Product Type In-line Regulator
	Inlet Connection Type Threaded
	Sub Type Banjo
	Inlet Connection Size 16 mm
	Outlet Connection Size 16 mm
	Series Pneufit C
	Inlet Thread Standard G 1/2
	Inlet Port Gender Male
	Maximum Operating Pressure 10 bar
	Minimum Operating Temperature 0°C
	Material Polybutylene Terephthalate
	Maximum Operating Temperature 60°C
	Standards/Approvals No
	Hazardous Area Certification No
	Minimum Operating Pressure -0.9bar
	Model Number C0K51

Vrijgesteld

Land van herkomst:: KR

IMI Norgren Flow Controller, Banjo Type, G1/2 Thread - PNEUFIT C Series - C0K511248

Looking to power up your pneumatic cylinder quickly and efficiently? This flow controller from IMI Norgren is up to the task. It regulates pressure to keep your system ticking over productively. The stainless steel grab ring easily grips onto your nylon or polyurethane tubing, so you can get your cylinder started in a flash. A sturdy O-ring seal is on hand to achieve a robust, leak-free fit you can count on. As this unit has a housing made of nickel-plated brass, you can trust it to shrug off contamination and resist corrosion.

Features & Benefits

• Standard-sized inlet and outlet ports of 12mm for wide compatibility

• Lockable adjustment function provides added security

• Stem seal ensures a 360° swivel connection

• Silicone-free U-packing delivers a sturdy seal

• Performs reliably in ambient temperatures between -20°C and +60°C

Applications

• Factory automation

• Mould water cooling

• Medical equipment

Will I need any extra fittings to use this flow controller?

No, for convenience, the component attaches straight to your pneumatic cylinder or other actuator, without the need for additional fittings.