SMC 200 L/s Rc 3/8 Pneumatic Separator, 1 bar to 1 Mpa
- RS-stocknr.:
- 234-4163
- Fabrikantnummer:
- AMJ4000-F03
- Fabrikant:
- SMC
Subtotaal (1 eenheid)*
€ 162,06
(excl. BTW)
€ 196,09
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 04 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 162,06 |
*prijsindicatie
- RS-stocknr.:
- 234-4163
- Fabrikantnummer:
- AMJ4000-F03
- Fabrikant:
- SMC
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SMC | |
| Port Size | Rc 3/8 | |
| Product Type | Pneumatic Separator | |
| Maximum Flow Rate | 200L/s | |
| Connection Thread Standard | Rc | |
| Series | AMJ | |
| Seal Material | Nitrile Rubber (NBR) | |
| Maximum Operating Pressure | 1 Mpa | |
| Minimum Operating Temperature | 5°C | |
| Maximum Operating Temperature | 60°C | |
| Minimum Operating Pressure | 1bar | |
| Overall Height | 53mm | |
| Standards/Approvals | No | |
| Overall Width | 53mm | |
| Bowl Material | Polycarbonate | |
| Alles selecteren | ||
|---|---|---|
Merk SMC | ||
Port Size Rc 3/8 | ||
Product Type Pneumatic Separator | ||
Maximum Flow Rate 200L/s | ||
Connection Thread Standard Rc | ||
Series AMJ | ||
Seal Material Nitrile Rubber (NBR) | ||
Maximum Operating Pressure 1 Mpa | ||
Minimum Operating Temperature 5°C | ||
Maximum Operating Temperature 60°C | ||
Minimum Operating Pressure 1bar | ||
Overall Height 53mm | ||
Standards/Approvals No | ||
Overall Width 53mm | ||
Bowl Material Polycarbonate | ||
- Land van herkomst:
- JP
The SMC series AMJ is effective for removing water droplets from the air sucked into vacuum pumps and ejectors. Over 90% of droplets can be removed through the use of a special water droplet removing element. The provision of a drain cock makes it possible to discharge the drain manually after breaking the vacuum.
Removes water droplets from air by simply installing in vacuum lines
Prevents malfunction of vacuum pumps and ejectors
Over 90% of water droplets can be removed using a dedicated element
Gerelateerde Links
- SMC 200 L/s Rc 3/8 Pneumatic Separator, 1 bar to 1 Mpa
- SMC 200 L/min Rc 1/4 Pneumatic Separator, 1 MPa to 1 Mpa
- SMC 300 L/min G 1/2 Pneumatic Separator, 0.1 MPa to 100 bar
- SMC 5 L/s 1/2 in Pneumatic Separator, -1 bar to 10 bar
- SMC G 3/8 Water Separator, 0.05 MPa to 1 Mpa
- SMC 200 L/s G 1/4 Mist Separator, 0.05 MPa to 1 Mpa
- SMC 3.33 L/s 3/8 in Pneumatic Separator 0.1 MPa to 10 bar
- SMC 8.33 L/s 3/8 in Pneumatic Separator 0.1 MPa to 10 bar