MOXA 1 Port PoE Injector, 24 V, 48V dc Input 60 W, 24 V, 48V dc Output, 2.71 A

This PoE injector supplies power and data over Ethernet to a single device in industrial settings, enabling remote powering of network equipment while maintaining compact installation options. It accepts DC input and delivers PoE output compatible with IEEE 802.3af/at standards, making it suitable for installations where a separate power run is undesirable. Mounting flexibility and an operating temperature range support deployment in controlled industrial environments.

• Provides 60 W power to a single load for higher-powered devices
• Supports 24V and 48V DC inputs to match existing supply rails
• Delivers 2.71 A output to drive equipment with substantial current needs
• Gigabit data throughput at 1000 Mbps for high-bandwidth links
• Operates from 0 to 60 °C for continuous use in warm industrial sites
• MTBF of 2,407,739 h indicating long operational life between failures

• Suitable for powering network cameras in factory automation
• Ideal for supplying access points in warehouse wireless networks
• Used with remote I/O modules where local power is not available
• Can be used for PoE-enabled sensors in process-control racks
• Suitable for CCTV installations requiring DIN-rail or wall mounting

Power is supplied via a removable 4-contact terminal block that accepts the designated DC input voltage.

Yes, it is designed for DIN-rail mounting and can also be secured to walls to fit varied panel layouts.

It complies with relevant emissions and safety standards including EN 55032, FCC Part 15B, CISPR 32 and EN 60950-1 for electromagnetic performance and basic safety.

There are two Ethernet ports present to route data alongside the single powered output.

The unit is compact with a width of 30 mm, length of 115mm and depth of 78.8mm to simplify space planning.