onsemi, Power Factor Controller IC 65 kHz 9-Pin, SOIC 35 V
- RS-stocknr.:
- 214-8827P
- Fabrikantnummer:
- NCP1618ADR2G
- Fabrikant:
- onsemi
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 214-8827P
- Fabrikantnummer:
- NCP1618ADR2G
- Fabrikant:
- onsemi
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | onsemi | |
| Product Type | Power Factor Controller IC | |
| Start-up Supply Current | 1mA | |
| Maximum Source Current | 500mA | |
| Sub Type | Power Factor Controller | |
| Maximum Sink Current | 800mA | |
| Switching Frequency | 65kHz | |
| Supply Current | 1mA | |
| Zero Power Detection | Yes | |
| Mount Type | Surface | |
| Package Type | SOIC | |
| Pin Count | 9 | |
| Minimum Supply Voltage | 9.5V | |
| Maximum Supply Voltage | 35V | |
| Minimum Operating Temperature | -40°C | |
| Series | NCP1618A | |
| Standards/Approvals | No | |
| Height | 1.75mm | |
| Length | 5mm | |
| Maximum Operating Temperature | 125°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk onsemi | ||
Product Type Power Factor Controller IC | ||
Start-up Supply Current 1mA | ||
Maximum Source Current 500mA | ||
Sub Type Power Factor Controller | ||
Maximum Sink Current 800mA | ||
Switching Frequency 65kHz | ||
Supply Current 1mA | ||
Zero Power Detection Yes | ||
Mount Type Surface | ||
Package Type SOIC | ||
Pin Count 9 | ||
Minimum Supply Voltage 9.5V | ||
Maximum Supply Voltage 35V | ||
Minimum Operating Temperature -40°C | ||
Series NCP1618A | ||
Standards/Approvals No | ||
Height 1.75mm | ||
Length 5mm | ||
Maximum Operating Temperature 125°C | ||
Automotive Standard No | ||
The ON Semiconductor NCP1618 is an innovative multimode power factor controller. The circuit naturally transitions from one operation mode to another depending the switching period duration so that the efficiency is optimized over the line/load range.
Internal compensation of the Regulation loop
Line range detection