STMicroelectronics Demonstration Board Power Management for STBB1-APUR for MOSFET Switch
- RS-stocknr.:
- 196-1834
- Fabrikantnummer:
- STEVAL-ISA063V2
- Fabrikant:
- STMicroelectronics
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
- RS-stocknr.:
- 196-1834
- Fabrikantnummer:
- STEVAL-ISA063V2
- Fabrikant:
- STMicroelectronics
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | STMicroelectronics | |
| Power Management Function | Power Management | |
| Product Type | Power Management Development Kit | |
| For Use With | MOSFET Switch | |
| Kit Classification | Evaluation Board | |
| Featured Device | STBB1-APUR | |
| Kit Name | Demonstration Board | |
| Standards/Approvals | RoHS | |
| Alles selecteren | ||
|---|---|---|
Merk STMicroelectronics | ||
Power Management Function Power Management | ||
Product Type Power Management Development Kit | ||
For Use With MOSFET Switch | ||
Kit Classification Evaluation Board | ||
Featured Device STBB1-APUR | ||
Kit Name Demonstration Board | ||
Standards/Approvals RoHS | ||
- Land van herkomst:
- IT
The STEVAL-ISA063V2 demonstration board implements a typical buck-boost DC-DC converter based on STMicroelectronics’ STBB1-APUR high efficiency single inductor dual mode buck-boost DC-DC converter. The device is fixed frequency and capable of providing output voltages ranging from 1.2 V to 5.5 V and input voltages from 2.0 V to 5.5 V.
The STBB1-APUR can operate with input voltages higher than, equal to, or lower than the output voltage, rendering the product suitable for single lithium-ion (Li-Ion), multicell alkaline or NiMH applications where the output voltage is within the battery voltage range.
The integrated low-RDSonN-channel and P-channel MOSFET switches contribute to its high efficiency.
Buck-boost DC-DC converter
Operating input voltage range: 2.0 V to 5.5 V
2% DC feedback voltage tolerance
Synchronous rectification
Shutdown function
1.5 MHz switching frequency
Power save mode at light load
Typical efficiency: > 94%
1 A output current capability
Shutdown current: < 1 μA
Gerelateerde Links
- STMicroelectronics Demonstration Board Power Management for VIPer06XN for Power Supply
- STMicroelectronics Demonstration Board Power Management for ST7580 for Power Line Applications
- STMicroelectronics Demonstration Board Power Management for VIPER16LD for Non-Isolated SMPS
- STMicroelectronics Demonstration Board Power Management for VNI8200XP for High Side Driver
- STMicroelectronics Demonstration Board Power Management for L5973D for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board Power Management for L7980 for Step-Down Switching Regulator
- STMicroelectronics Demonstration Board Power Management for VIPER16 for Non-Isolated Auxiliary Power Supply
- STMicroelectronics Demonstration Board Power Management for VN808CM-E for Octal High-Side Drivers