Omron Power Relay, 24V ac Coil, 10A Switching Current, SPDT

RS-stocknr.:: 266-2972
Artikelnummer Distrelec:: 136-18-873
Fabrikantnummer:: G2R-1-SNI 24VAC (S)
Fabrikant:: Omron

Omron Power Relay, 24V ac Coil, 10A Switching Current, SPDT

Subtotaal (1 eenheid)*

€ 10,36

(excl. BTW)

€ 12,54

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 76 stuk(s) vanaf 05 mei 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 10,36

*prijsindicatie

RS-stocknr.:: 266-2972
Artikelnummer Distrelec:: 136-18-873
Fabrikantnummer:: G2R-1-SNI 24VAC (S)
Fabrikant:: Omron

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Omron
	Product Type	Power Relay
	Coil Voltage	24V ac
	Contact Configuration	SPDT
	Series	G2R
	Terminal Type	Plug-In
	Switching Current	10A
	Switching Power	2.5W
	Switching DC Voltage	125V dc
	Switching AC Voltage	440V ac
	Minimum Operating Temperature	-40°C
	Coil Resistance	253Ω
	Maximum Operating Temperature	70°C
	Width	13mm
	Height	40.5mm
	Length	29mm
	Standards/Approvals	UL 508, CSA, IEC/VDE
	Coil Power	0.9VA
	Contact Material	Silver Tin Indium
	Contact Resistance	100mΩ

	Alles selecteren
	Merk Omron
	Product Type Power Relay
	Coil Voltage 24V ac
	Contact Configuration SPDT
	Series G2R
	Terminal Type Plug-In
	Switching Current 10A
	Switching Power 2.5W
	Switching DC Voltage 125V dc
	Switching AC Voltage 440V ac
	Minimum Operating Temperature -40°C
	Coil Resistance 253Ω
	Maximum Operating Temperature 70°C
	Width 13mm
	Height 40.5mm
	Length 29mm
	Standards/Approvals UL 508, CSA, IEC/VDE
	Coil Power 0.9VA
	Contact Material Silver Tin Indium
	Contact Resistance 100mΩ

Datasheet - G2R-1-SNI 24VAC (S)

Omron G2R Series Power Relay, 24V AC Coil Voltage, SPDT Contact Configuration - G2R-1-SNI 24VAC (S)

This power relay is a Compact electromechanical switching device designed for industrial control and automation environments. It operates with an AC Coil to control a single-pole double-throw contact set, providing a practical switching solution where Compact size and straightforward plug-in installation are required. The unit is suited to panel or control-module use where moderate load switching and standard environmental ranges are expected.

Features and Benefits:

• 24VAC 0.9VA Coil delivers low energy consumption and consistent actuation
• 253Ω Coil resistance ensures predictable drive requirements
• SPDT contact arrangement permits both make and break switching flexibility
• Silver tin indium contacts reduce wear and support frequent operations
• 10A switching capability handles typical control-circuit loads
• Terminal plug-in design enables quick replacement and easy wiring

Applications

• Suitable for motor starter control circuits in automation panels
• Ideal for switching auxiliary loads in building management systems
• Used for signal routing in industrial control racks
• Can be used for interlocking and safety logic in machinery control

What voltage levels can be switched for AC applications?

It can switch AC loads up to 440 V, making it suitable for a wide range of control voltages.

How does the relay perform with DC loads?

It is rated for DC switching up to 125V with a power-handling figure of 2500 mW for contact applications.

What environmental temperatures will it tolerate in service?

The relay is specified to operate between −40°C and 70°C, covering most industrial ambient conditions.

Which approvals support its use in regulatory installations?

The unit carries approvals to UL508, CSA and IEC/VDE standards for recognised industrial use.