Druck DPI 800 25 mbar to 200 mbar Pressure Calibrator, RSCAL

RS-stocknr.:: 467-7070
Fabrikantnummer:: I800S-1-465-7644
Fabrikant:: Druck

Druck DPI 800 25 mbar to 200 mbar Pressure Calibrator, RSCAL

Subtotaal (1 eenheid)*

€ 1.665,99

(excl. BTW)

€ 2.015,85

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Tijdelijk niet op voorraad

Verzending 2 stuk(s) vanaf 18 november 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.665,99

*prijsindicatie

RS-stocknr.:: 467-7070
Fabrikantnummer:: I800S-1-465-7644
Fabrikant:: Druck

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Druck
	Battery Type	AA Alkaline
	Maximum Pressure Measurement	200mbar
	Product Type	Pressure Calibrator
	Minimum Pressure Measurement	25mbar
	Accuracy	±0.01 %
	Data Logging	Yes
	Model Number	DPI 800
	Current Loop Measurement	Yes
	Display Type	LCD Backlight
	Leak Testing	Yes
	Power Source	Battery
	Weight	500g
	Minimum Operating Temperature	-10°C
	Battery Life	50h
	Maximum Operating Temperature	50°C
	Standards/Approvals	BS EN61010:2001, BS EN61326-1:1998 + A2:2001, CE
	Length	180mm
	Height	50mm
	Width	85mm
	Hazardous Area Certification	No
	Calibrated	RSCAL

	Alles selecteren
	Merk Druck
	Battery Type AA Alkaline
	Maximum Pressure Measurement 200mbar
	Product Type Pressure Calibrator
	Minimum Pressure Measurement 25mbar
	Accuracy ±0.01 %
	Data Logging Yes
	Model Number DPI 800
	Current Loop Measurement Yes
	Display Type LCD Backlight
	Leak Testing Yes
	Power Source Battery
	Weight 500g
	Minimum Operating Temperature -10°C
	Battery Life 50h
	Maximum Operating Temperature 50°C
	Standards/Approvals BS EN61010:2001, BS EN61326-1:1998 + A2:2001, CE
	Length 180mm
	Height 50mm
	Width 85mm
	Hazardous Area Certification No
	Calibrated RSCAL

DPI 800/802 Pressurec Indicator/Loop Calibrator Data Sheet

Vrijgesteld

Land van herkomst:: GB

Druck Pressure Calibrator, ±0.01% Accuracy, 25m bar Minimum Pressure Measurement - I800S-1-465-7644

This pressure calibrator is a handheld instrument designed to measure, verify and test low-pressure instrumentation in non-hazardous environments. It provides precise pressure readings and supports electrical loop diagnostics, while being powered by replaceable batteries for field use. The unit includes an illuminated display to maintain readability in varied lighting conditions and conforms to relevant BS EN standards for safety and electromagnetic compatibility.

Features and Benefits:

• ±0.01% accuracy enables precise calibration and measurement
• 25 mbar to 200 mbar range supports low-pressure device verification
• Data logging stores measurement sequences for later analysis
• Current loop measurement allows transmitter diagnostic checks
• Leak testing functionality identifies system integrity issues

Applications

• Suitable for commissioning low-pressure differential transmitters
• Ideal for routine calibration in maintenance rounds
• Used for verifying control system pneumatic inputs
• Can be used for on-site leak detection and troubleshooting
• Used with field instruments requiring loop integrity checks

What power arrangements does the instrument use?

It runs on AA alkaline batteries and operates continuously for up to 50 h.

Which display type assists during low-light operation?

An LCD with backlight provides clear numerical readout in dim areas.

Is the device certified for electrical safety and EMC?

It complies with BS EN 61010:2001 and BS EN 61326-1:1998+A2:2001 standards.

Can it be used in classified hazardous locations?

It is not certified for hazardous area use and should be kept in safe zones.

How portable is the unit for field technicians?

The instrument is Compact at 85 x 180 x 50 mm and weighs 500 g for ease of handling.