Fluke 719PRO -0.8 bar to 2 bar Pressure Calibrator

This pressure calibrator is a handheld, battery-powered instrument for field calibration of transmitters, switches and gauges. It combines on-board pressure generation with mA sourcing, simulation and measurement to support maintenance and commissioning tasks in automation, electrical and mechanical settings. The unit displays multiple parameters simultaneously on an LCD backlight for clear in-service readings.

• 0.0001bar resolution delivers fine pressure adjustment for transmitter calibration
• ±0.025% full-scale accuracy provides high-accuracy pressure calibrator 6-month accuracy
• Integrated electric pump reaches up to 20bar for broad test coverage
• Current loop measurement and sourcing supports loop checks and device simulation
• Programmemable pump limit prevents over-pressurisation during setpoint routines
• AA battery operation with 300 pump cycles to150PSI enables extended field use

• Suitable for calibrating high-accuracy pressure transmitters in process plants
• Ideal for pressure switch testing using the dedicated switch-test function
• Used with gauges and sensors that require precise pressure sourcing and mA loop checks
• Can be used for on-site verification of pressure modules and field instruments
• Used for commissioning tasks where portable pressure calibration and loop simulation are needed

It is intended for dry Air and non-corrosive gases only

Operating temperature range is -10°C to +50°C and accuracy is unaffected between 15°C and 35°C

Standard banana jacks support mA sourcing and measurement with a 1000ohm maximum load in source mode and a 24V loop supply capability.

The product family covers ranges from -0.8 to 20bar with resolutions as fine as 0.0001bar on lower ranges and 0.001bar on higher ranges.

Test leads with alligator clips, accessory hose kit with an eighth-inch (x2) quick fit adapters and 1m of hose, liquid and dirt trap, soft case, manual (on CD-Rom in 16 languages) and NIST Traceable Certificate of Calibration.