Honeywell HSCDRRV001PGSA3 Gauge Pressure SensorSurface 8 DIP
- RS-stocknr.:
- 211-9928
- Fabrikantnummer:
- HSCDRRV001PGSA3
- Fabrikant:
- Honeywell
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 37,93
(excl. BTW)
€ 45,90
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Op voorraad
- 95 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 37,93 |
| 5 - 9 | € 36,91 |
| 10 - 24 | € 35,92 |
| 25 - 39 | € 35,01 |
| 40 + | € 34,14 |
*prijsindicatie
- RS-stocknr.:
- 211-9928
- Fabrikantnummer:
- HSCDRRV001PGSA3
- Fabrikant:
- Honeywell
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Honeywell | |
| Sensor Type | Gauge Pressure Sensor | |
| Maximum Overload Pressure | 69kPa | |
| Product Type | Gauge Pressure Sensor | |
| Mount Type | Surface | |
| Package Type | DIP | |
| Pin Count | 8 | |
| Minimum Supply Voltage | 3.3V | |
| Maximum Operating Pressure | 6.89 kPa | |
| Maximum Supply Voltage | 5V | |
| Port Type | Dual Radial Barbed | |
| Accuracy | ±0.25 % | |
| Maximum Operating Temperature | 85°C | |
| Series | HSC | |
| Standards/Approvals | No | |
| Width | 13.3 mm | |
| Length | 10mm | |
| Height | 13.75mm | |
| Minimum Operating Pressure | 0psi | |
| Minimum Operating Temperature | -20°C | |
| Automotive Standard | No | |
| Alles selecteren | ||
|---|---|---|
Merk Honeywell | ||
Sensor Type Gauge Pressure Sensor | ||
Maximum Overload Pressure 69kPa | ||
Product Type Gauge Pressure Sensor | ||
Mount Type Surface | ||
Package Type DIP | ||
Pin Count 8 | ||
Minimum Supply Voltage 3.3V | ||
Maximum Operating Pressure 6.89 kPa | ||
Maximum Supply Voltage 5V | ||
Port Type Dual Radial Barbed | ||
Accuracy ±0.25 % | ||
Maximum Operating Temperature 85°C | ||
Series HSC | ||
Standards/Approvals No | ||
Width 13.3 mm | ||
Length 10mm | ||
Height 13.75mm | ||
Minimum Operating Pressure 0psi | ||
Minimum Operating Temperature -20°C | ||
Automotive Standard No | ||
The Honeywell TruStability High Accuracy Silicon Ceramic (HSC) Series is a piezo resistive silicon pressure sensor offering a ratio metric analogue or digital output for reading pressure over the specified full scale pressure span and temperature range. The HSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at approximately 1 kHz for analogue and 2 kHz for digital.
Stability and reliability
Industry-leading accuracy of ±0.25 %FSS BFSL
Port and housing options simplify integration
Wide pressure range, from ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2 O to ±150 psi
Small package size
Extremely low power consumption
Gerelateerde Links
- Honeywell Gauge Pressure Sensor PCB Mount 69kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 69kPa Overload Max, DIP
- Honeywell Gauge Pressure Sensor Through-Hole Mount 206.84kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 206.83kPa Overload Max, DIP
- Honeywell Piezoresistive Pressure Sensor Through-Hole Mount 206.84kPa Overload Max, DIP
- Honeywell Differential Pressure Sensor Through-Hole Mount 206.84kPa Overload Max, DIP
- Honeywell Differential Pressure Sensor PCB Mount 200kPa Overload Max, SMT
- Honeywell Piezoresistive Pressure Sensor Surface Mount 68.9kPa Overload Max, SMT