Honeywell Technologies HSCMAND001BAAA5 Pressure SensorBoard 8 SMT

This pressure sensor is a piezoresistive board-mounted device designed to measure absolute, gauge or differential pressure in non‑corrosive, non‑ionic gases and, for selected ranges, compatible non‑corrosive liquids. It provides either a ratiometric analogue output or a 14‑bit digital output compatible with I2C or SPI interfaces and is temperature‑compensated for accurate readings across defined operating conditions. The device is intended for PCB mounting in Compact SMT or board formats and is manufactured to ISO 9001 quality standards.

• ±0.25%FSS accuracy reduces software compensation needs
• 3.3V and 5.0V operation supports low-voltage designs
• 8-pin package enables direct PCB integration and connections
• Calibrated output updates rapidly to support fast control
• Less than 10mW typical power consumption extends battery life
• Overload protection to 200kPa improves system robustness

• Suitable for medical ventilators and respiratory monitoring equipment
• Used with HVAC transmitters for indoor Air quality control
• Ideal for differential flow measurement and gas flow instrumentation
• Can be used for barometry and flow calibrators in labs
• Suitable for pneumatic control in industrial automation systems

It is intended for non-corrosive, non-ionic gases, liquid-media options exist for higher pressure ranges but require Port1 only.

Calibrated analogue outputs refresh at approximately 1kHz and digital outputs at approximately 2kHz.

Optional internal diagnostics can detect most internal failures, including burst conditions, when the diagnostic option is specified.

The device is characterised to operate from -20 to 85°C with compensated performance specified over a narrower compensated range.

Outputs are available as ratiometric analogue or as 12-14-bit compatible digital via I2C or SPI, allowing direct microcontroller connection.