RS PRO PCB Reed Relay, 5V dc Coil, SPDT, 175V dc Max, 250mA Max, 200 Ω
- RS-stocknr.:
- 291-9704
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 14,36
(excl. BTW)
€ 17,38
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 14,36 |
*prijsindicatie
- RS-stocknr.:
- 291-9704
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Contact Configuration | SPDT | |
| Product Type | Reed Relay | |
| Mount Type | PCB | |
| Switching Current | 250mA | |
| Coil Power | 125mW | |
| Terminal Type | Through Hole | |
| Coil Resistance | 200Ω | |
| Operating Time | 0.7ms | |
| Minimum Operating Temperature | -20°C | |
| Switching Power | 15W | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | No | |
| Series | RS PRO | |
| Length | 19.3mm | |
| Height | 5.1mm | |
| Isolation Coil To Contact | 1.5kV dc | |
| Latching | No | |
| Contact Resistance | 250mΩ | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Contact Configuration SPDT | ||
Product Type Reed Relay | ||
Mount Type PCB | ||
Switching Current 250mA | ||
Coil Power 125mW | ||
Terminal Type Through Hole | ||
Coil Resistance 200Ω | ||
Operating Time 0.7ms | ||
Minimum Operating Temperature -20°C | ||
Switching Power 15W | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals No | ||
Series RS PRO | ||
Length 19.3mm | ||
Height 5.1mm | ||
Isolation Coil To Contact 1.5kV dc | ||
Latching No | ||
Contact Resistance 250mΩ | ||
- Land van herkomst:
- DE


RS PRO SPDT Reed Relay, 0.25 A, 5 V DC
If you're looking for a compact, speedy relay to use in an electrical circuit, consider this RS PRO single-pole, normally open (SPNO) reed relay. The neat and low profile design features a mineral-filled casing, and the device has copper alloy pins for strength coupled with high conductivity. It has a maximum switching current of 0.25 A AC/DC and a coil voltage of 5 V DC.
You can use this relay on printed circuit boards thanks to its DIP (dual in-line package) housing and the casing is fully sealed. It features a normally open (NO) pole and a coil suppression diode across pins two and six.
Needing little power to actuate, you'll often find these types of relays used in electronic circuits. This product is UL (Underwriters Laboratories) approved and meets the organisation's international safety standards.
Features and Benefits
• Reed relay with SPNO contact configuration
• Maximum switching power of 3 W (DC)
• Maximum switching current rating of 0.25 A (AC/DC)
• Isolation coil to contact of 1.5 kV DC
• Maximum switching voltage of 175 V DC
• Life of 1000000000 electric cycles
• Operating time of 0.5 ms
• PCB mounting type
• Contact resistance of 150 (Static) mΩ and 200 (Dynamic) mΩ
• Operating temperature range of -20°C to +70°C
• Coil power of 50 mW
• Dimensions of 19.3 mm x 6.4 mm x 5.1 mm
• Coil voltage of 5 V DC
• Through-hole terminal
• Coil resistance of 200 Ω
• RoHS (Restriction of Hazardous Substances) compliant
RS PRO
RS PRO is our own brand range and brings you a wide range of high-quality, great value products offering you more choice. Trusted by engineers all over the world, every part of every RS PRO product has been rigorously tested against demanding industry standards; theyre only given the RS PRO Seal of Approval if were confident of their exceptional quality, which means you can be confident too.
Approvals
UL
Gerelateerde Links
- TE Connectivity PCB Reed Relay SPDT 200 Ω
- Celduc PCB Reed Relay SPDT 250mA Max, 200 Ω
- TE Connectivity PCB Reed Relay SPDT 1A Max, 2000 Ω
- TE Connectivity PCB Reed Relay SPDT 2000 Ω
- Celduc PCB Reed Relay SPDT 250mA Max, 500 Ω
- Celduc PCB Reed Relay DPST 500mA Max, 200 Ω
- RS PRO PCB Reed Relay SPNO 500mA Max, 200 Ω
- Littelfuse PCB Reed Relay 2 NO 500mA Max, 200 Ω
