Texas Instruments Transponder RF430CL330HCPWR, Tag

Datasheets
Wetgeving en compliance
Conform
Productomschrijving

RF430CL330H Dynamic NFC Interface Transponder, Texas Instruments

The Dynamic NFC Interface Transponder RF430CL330H is an NFC Tag Type 4 device that combines a wireless NFC interface and a wired SPI or I²C interface.

Near Field Communication (NFC) - Texas Instruments

Specificaties
Kenmerk Waarde
Component Type Tag
Supported Bus Interfaces SPI
Supply Voltage 3 → 3.6V
Dimensions 4.5 x 5.1 x 1.05mm
Height 1.05mm
Length 5.1mm
Maximum Operating Temperature +85°C
Minimum Operating Temperature -40°C
Width 4.5mm
465 op voorraad - levertijd is 2 werkdag(en).
Prijs Each (In a Pack of 5)
1,404
(excl. BTW)
1,699
(incl. BTW)
Aantal stuks
Per stuk
Per pak*
5 - 45
€ 1,404
€ 7,02
50 - 95
€ 1,122
€ 5,61
100 +
€ 0,984
€ 4,92
*prijsindicatie
Vanwege het beperkte aanbod kan RS op dit moment geen backorders accepteren.
Verpakkingsopties
Related Products
The TRF7960/61 is an integrated analogue front end ...
Description:
The TRF7960/61 is an integrated analogue front end and data-framing system for a 13.56-MHz RFID reader system. Operating Frequency Range: 13.56MHzRF Output Power: +20 or +23dBmAdjustable ASK modulation rangeReceiver band-pass filter with user-selectable corner frequenciesCompletely integrated protocol handlingDual ...
The RWD-QT-LP-SMT is a surface mount (SMT) package ...
Description:
The RWD-QT-LP-SMT is a surface mount (SMT) package option suitable for modern printed circuit boards. Supports HitagS256, HitagS2048, Hitag1, Hitag2 and EM4XXX transponders at 125 KHz. To be used with baseboard RWD-QT-SMT for evaluation and development.
Description:
The UART-B1 is a low cost full RFID/NFC read/write device with UART interface. Can operate in “host” connected mode or “stand alone” mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers from Mifare ...
Description:
The RS232-B1 v2 is a low cost full RFID/NFC read/write device with RS232 interface that can operate in "host" connected mode or "stand alone" mode. Supports Mifare Classic 1k & 4k, NTAG2xx and Ultralight. Additionally, you can read serial numbers ...