3M, 1.27 mm Pitch, 26

This ribbon cable provides flexible, multi-conductor interconnection for industrial and electronic systems, designed for environments demanding reduced toxic emissions and enhanced flexibility. It is intended for wiring assemblies where multiple parallel conductors are required and where elevated temperature capability and insulation performance are important.

• 28AWG tin-plated stranded conductors improve conductor flexibility and handling
• 19 strands per conductor reduce breakage risk during repeated flexing
• 300V rating supports moderate-voltage signal and power distribution
• Low smoke zero halogen polyolefin jacket minimises toxic emissions in case of fire
• Rated to 105°C for sustained operation in higher-temperature installations
• Unscreened flat construction eases mass termination to connectors with 1.27mm pitch

• Suitable for internal wiring of automation control panels
• Ideal for ribbon-to-board connector harnesses with 1.27mm pitch
• Used with cable assemblies in mechanical actuator systems
• Can be used for wire harnesses in electronic test fixtures
• Used for multi-conductor signal runs in electrical distribution modules

The stranded conductor construction with multiple fine strands increases flexibility and fatigue resistance for high-movement routing.

The polyolefin outer layer is formulated to produce minimal smoke and no halogenated corrosive gases when exposed to fire conditions.

The cable conforms to RoHS requirements and meets the referenced IEC material standard for its construction.

The conductors are arranged for use with 1.27mm pitch terminations and compatible ribbon connectors.

It is specified to operate at temperatures down to -40°C and up to 105°C.

UL E42769, Style 21682