FAG 30210-A Taper 50 mm ID Roller Bearing, 90 mm OD
- RS-stocknr.:
- 174-0977
- Fabrikantnummer:
- 30210-A
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 49,81
(excl. BTW)
€ 60,27
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 9 stuk(s) vanaf 09 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 49,81 |
| 5 - 9 | € 47,81 |
| 10 - 24 | € 46,83 |
| 25 + | € 45,81 |
*prijsindicatie
- RS-stocknr.:
- 174-0977
- Fabrikantnummer:
- 30210-A
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Parallel | |
| Cage Material | Steel | |
| Cone Width | 21.75mm | |
| Number of Rows | 1 | |
| Static Load Rating | 96kN | |
| Limiting Speed | 8200rpm | |
| Outside Diameter | 90mm | |
| End Type | Open | |
| Bearing Dynamic Load Rating | 79kN | |
| Standards/Approvals | DIN 720 | |
| Series | 302 | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Parallel | ||
Cage Material Steel | ||
Cone Width 21.75mm | ||
Number of Rows 1 | ||
Static Load Rating 96kN | ||
Limiting Speed 8200rpm | ||
Outside Diameter 90mm | ||
End Type Open | ||
Bearing Dynamic Load Rating 79kN | ||
Standards/Approvals DIN 720 | ||
Series 302 | ||
Bearing Type Taper | ||
Tapered roller bearings comprise solid inner and outer rings with tapered raceways and tapered rollers in a window cage. Open bearings are not self-retaining. As a result, the inner ring with the rollers and the cage can be fitted separately from the outer ring. Metric and inch size bearings are available. Designs with a K in the designation have inch dimensions. For new designs, however, bearings in metric sizes should always be used in preference.
Radial and axial load capacity
Contact angle
Compensation of angular misalignments
Matched bearings
Integral tapered roller bearings
No setting of axial internal clearance required
Sealing
Lubrication
Operating temperature
Cages
Suffixes
Gerelateerde Links
- SKF 30210 Taper 50 mm ID Roller Bearing, 90 mm OD
- Timken 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Tapered Roller Bearing, 90 mm OD
- RS PRO 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- NTN 4T-30210 Taper Roller 50 mm ID Needle Roller Thrust Bearing, 90 mm OD
- FAG 32210-A Taper 50 mm ID Roller Bearing, 90 mm OD
- FAG 31318 Taper Roller 90 mm ID Roller Bearing, 190 mm OD
- FAG 33118 Taper Roller 90 mm ID Roller Bearing, 150 mm OD