Timken 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- RS-stocknr.:
- 193-0995
- Fabrikantnummer:
- 30210
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 46,90
(excl. BTW)
€ 56,75
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 46,90 |
| 5 - 9 | € 44,13 |
| 10 - 24 | € 43,25 |
| 25 + | € 42,31 |
*prijsindicatie
- RS-stocknr.:
- 193-0995
- Fabrikantnummer:
- 30210
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 50mm | |
| Bore Type | Tapered | |
| Cage Material | Sheet Metal | |
| Roller Material | Steel | |
| Outside Diameter | 90mm | |
| Static Load Rating | 87.4kN | |
| Cup Width | 17mm | |
| Number of Rows | 1 | |
| Cone Width | 21.75mm | |
| Limiting Speed | 7500rpm | |
| Bearing Material | Steel | |
| Series | TRB | |
| Bearing Dynamic Load Rating | 79.5kN | |
| Standards/Approvals | No | |
| Bearing Type | Taper | |
| Race Type | Grooved | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 50mm | ||
Bore Type Tapered | ||
Cage Material Sheet Metal | ||
Roller Material Steel | ||
Outside Diameter 90mm | ||
Static Load Rating 87.4kN | ||
Cup Width 17mm | ||
Number of Rows 1 | ||
Cone Width 21.75mm | ||
Limiting Speed 7500rpm | ||
Bearing Material Steel | ||
Series TRB | ||
Bearing Dynamic Load Rating 79.5kN | ||
Standards/Approvals No | ||
Bearing Type Taper | ||
Race Type Grooved | ||
- Land van herkomst:
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- RS PRO 30210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- NTN 4T-30210 Taper Roller 50 mm ID Taper Roller Bearing, 90 mm OD
- Timken 30308 Taper 40 mm ID Metric Roller Bearing, 90 mm OD
- Timken 33210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD
- Timken 32011X Taper 55 mm ID Metric Roller Bearing, 90 mm OD
- SKF 30210 Taper 50 mm ID Tapered Roller Bearing, 90 mm OD
- FAG 30210-A Taper 50 mm ID Roller Bearing, 90 mm OD