FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- RS-stocknr.:
- 190-8380
- Fabrikantnummer:
- 32303-A
- Fabrikant:
- FAG
Bulkkorting beschikbaar
Subtotaal (1 eenheid)*
€ 33,79
(excl. BTW)
€ 40,89
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 75,00
Tijdelijk niet op voorraad
- Verzending vanaf 10 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 33,79 |
| 5 - 9 | € 32,44 |
| 10 - 24 | € 31,81 |
| 25 + | € 31,10 |
*prijsindicatie
- RS-stocknr.:
- 190-8380
- Fabrikantnummer:
- 32303-A
- Fabrikant:
- FAG
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | FAG | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17 mm | |
| Bore Type | Tapered | |
| Cage Material | Steel | |
| Bearing Dynamic Load Rating | 36.5 KN | |
| End Type | Open | |
| Cone Width | 20.25mm | |
| Standards/Approvals | No | |
| Outside Diameter | 47 mm | |
| Static Load Rating | 36kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk FAG | ||
Product Type Roller Bearing | ||
Inside Diameter 17 mm | ||
Bore Type Tapered | ||
Cage Material Steel | ||
Bearing Dynamic Load Rating 36.5 KN | ||
End Type Open | ||
Cone Width 20.25mm | ||
Standards/Approvals No | ||
Outside Diameter 47 mm | ||
Static Load Rating 36kN | ||
Bearing Type Taper | ||
High radial loads occur
High axial loads act on one side
Combined loads must be supported (radial and axial forces acting simultaneously)
Precise axial guidance of the shaft is required (locating bearing function)
The bearing arrangement must have very high axial rigidity
The bearing position is operated clearance-free or under preload (single bearings are adjusted against each other)
High running accuracy is required
The load carrying capacity of angular contact ball bearings is no longer sufficient and the higher speed suitability of angular contact ball bearings is not required
The bearings are not required to compensate misalignments
The design objective comprises compact, rigid and economical bearing arrangements with a high load carrying capacity
Gerelateerde Links
- SKF 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD
- FAG 30203-A Taper 17 mm ID Roller Bearing, 40 mm OD
- FAG 32005-X-XL Taper 25 mm ID Roller Bearing, 47 mm OD
- FAG 30204-A Taper 20 mm ID Tapered Roller Bearing, 47 mm OD