SKF 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- RS-stocknr.:
- 208-0055
- Fabrikantnummer:
- 32303
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 26,11
(excl. BTW)
€ 31,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 1 stuk(s) vanaf 08 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 26,11 |
*prijsindicatie
- RS-stocknr.:
- 208-0055
- Fabrikantnummer:
- 32303
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 17mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Cup Width | 16mm | |
| Standards/Approvals | No | |
| Outside Diameter | 47mm | |
| Cone Width | 20.25mm | |
| End Type | Shielded | |
| Limiting Speed | 16000rpm | |
| Bearing Material | Steel | |
| Number of Rows | 1 | |
| Bearing Dynamic Load Rating | 35.4kN | |
| Static Load Rating | 34.3kN | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 17mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Cup Width 16mm | ||
Standards/Approvals No | ||
Outside Diameter 47mm | ||
Cone Width 20.25mm | ||
End Type Shielded | ||
Limiting Speed 16000rpm | ||
Bearing Material Steel | ||
Number of Rows 1 | ||
Bearing Dynamic Load Rating 35.4kN | ||
Static Load Rating 34.3kN | ||
Bearing Type Taper | ||
Race Type Tapered | ||
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 32303 Taper 17 mm ID Roller Bearing, 47 mm OD
- FAG 32303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 30303 Single Row Tapered Roller 17 mm ID Taper Roller Bearing, 47 mm OD
- NTN 4T-30303 Taper Roller 17 mm ID Roller Bearing, 47 mm OD
- SNR 30303A Taper Roller 17 mm ID Tapered Roller Bearing, 47 mm OD
- SKF 30203 Taper 17 mm ID Roller Bearing, 40 mm OD
- FAG 30303-A Taper 17 mm ID Roller Bearing, 47 mm OD
- SKF 32005X/Q Taper 25 mm ID Roller Bearing, 47 mm OD