Timken 30213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- RS-stocknr.:
- 193-0998
- Fabrikantnummer:
- 30213
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 76,52
(excl. BTW)
€ 92,59
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 23 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 76,52 |
| 5 - 9 | € 72,01 |
| 10 - 24 | € 70,55 |
| 25 + | € 69,01 |
*prijsindicatie
- RS-stocknr.:
- 193-0998
- Fabrikantnummer:
- 30213
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 65mm | |
| Bore Type | Tapered | |
| End Type | Shielded | |
| Outside Diameter | 120mm | |
| Static Load Rating | 158kN | |
| Bearing Dynamic Load Rating | 164kN | |
| Standards/Approvals | No | |
| Limiting Speed | 5600rpm | |
| Cone Width | 24.75mm | |
| Number of Rows | 1 | |
| Cup Width | 20mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 65mm | ||
Bore Type Tapered | ||
End Type Shielded | ||
Outside Diameter 120mm | ||
Static Load Rating 158kN | ||
Bearing Dynamic Load Rating 164kN | ||
Standards/Approvals No | ||
Limiting Speed 5600rpm | ||
Cone Width 24.75mm | ||
Number of Rows 1 | ||
Cup Width 20mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- CN
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- Timken 32213 Taper 65 mm ID Metric Roller Bearing, 120 mm OD
- SKF 30213 Taper 65 mm ID Roller Bearing, 120 mm OD
- RS PRO 30213 Taper 65 mm ID Roller Bearing, 120 mm OD
- NTN 4T-30213 Taper Roller 65 mm ID Needle Roller Thrust Bearing, 120 mm OD
- Timken 32013X Taper 65 mm ID Metric Roller Bearing, 100 mm OD
- Timken JM511946/JM511910 Taper 65 mm ID Roller Bearing, 110 mm OD
- Timken JLM710949C/JLM710910 Taper 65 mm ID Roller Bearing, 105 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD