Timken 32009X Taper 45 mm ID Metric Roller Bearing, 75 mm OD
- RS-stocknr.:
- 193-1014
- Fabrikantnummer:
- 32009X
- Fabrikant:
- Timken
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 35,14
(excl. BTW)
€ 42,52
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 16 stuk(s) vanaf 02 juni 2026
- Plus verzending 27 stuk(s) vanaf 08 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 35,14 |
| 5 - 9 | € 33,11 |
| 10 - 24 | € 32,39 |
| 25 + | € 31,71 |
*prijsindicatie
- RS-stocknr.:
- 193-1014
- Fabrikantnummer:
- 32009X
- Fabrikant:
- Timken
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Timken | |
| Product Type | Metric Roller Bearing | |
| Inside Diameter | 45mm | |
| Bore Type | Tapered | |
| Roller Material | Steel | |
| Number of Rows | 1 | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 78.7kN | |
| End Type | Open | |
| Outside Diameter | 75mm | |
| Cone Width | 20mm | |
| Bearing Material | Steel | |
| Cup Width | 15.5mm | |
| Static Load Rating | 84.3kN | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk Timken | ||
Product Type Metric Roller Bearing | ||
Inside Diameter 45mm | ||
Bore Type Tapered | ||
Roller Material Steel | ||
Number of Rows 1 | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 78.7kN | ||
End Type Open | ||
Outside Diameter 75mm | ||
Cone Width 20mm | ||
Bearing Material Steel | ||
Cup Width 15.5mm | ||
Static Load Rating 84.3kN | ||
Bearing Type Taper | ||
- Land van herkomst:
- PL
Timken tapered roller bearing components are precisely designed to manage both axial and radial loads.
Metric tapered roller bearing matched assemblies consist of two single-row bearings (type TS) with individually matched spacers that are set at the factory to pre-determined dimensions and tolerances.
The standard outer ring spacer is designed with lubricationholes to allow for lubricant flow into both bearing rows.
Matched bearing assemblies are supplied ready-to-fit into customer applications, with a unique serial number marked on spacers and bearing components for easy identification.
• Pre-set clearance simplifies mounting
• Higher productivity and greater uptime through precise setting
• High axial and radial load carrying capacity
• Axial loads accommodated in both directions
Gerelateerde Links
- NTN 4T-32009X Taper Roller 45 mm ID Needle Roller Thrust Bearing, 75 mm OD
- Timken 32215 Taper 75 mm ID Metric Roller Bearing, 130 mm OD
- Timken 32015X Taper 75 mm ID Metric Roller Bearing, 115 mm OD
- Timken 30309 Taper 45 mm ID Metric Roller Bearing, 100 mm OD
- Timken 32209 Taper 45 mm ID Metric Roller Bearing, 85 mm OD
- Timken 30209 Taper 45 mm ID Metric Roller Bearing, 85 mm OD
- RS PRO 32009 Taper 45 mm ID Metric Roller Bearing, 75 mm OD
- Timken 32210 Taper 50 mm ID Metric Roller Bearing, 90 mm OD