SKF 30218 Taper 90 mm ID Roller Bearing, 160 mm OD
- RS-stocknr.:
- 207-9987
- Fabrikantnummer:
- 30218
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 138,16
(excl. BTW)
€ 167,17
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 31 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 138,16 |
*prijsindicatie
- RS-stocknr.:
- 207-9987
- Fabrikantnummer:
- 30218
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 90mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Static Load Rating | 279kN | |
| Cup Width | 26mm | |
| Number of Rows | 1 | |
| Cone Width | 32.5mm | |
| Bearing Material | Steel | |
| Outside Diameter | 160mm | |
| Limiting Speed | 4000rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 219kN | |
| End Type | Shielded | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 90mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Static Load Rating 279kN | ||
Cup Width 26mm | ||
Number of Rows 1 | ||
Cone Width 32.5mm | ||
Bearing Material Steel | ||
Outside Diameter 160mm | ||
Limiting Speed 4000rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 219kN | ||
End Type Shielded | ||
Bearing Type Taper | ||
Race Type Tapered | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- RS PRO 30218 Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF 32218 Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF C 2218 K Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF C 2218 K/C3 Taper 90 mm ID Roller Bearing, 160 mm OD
- SKF T4EE 160/VB406 Taper Roller 160 mm ID Roller Bearing, 245 mm OD
- SKF T4DB 160 Taper 160 mm ID Roller Bearing, 220 mm OD
- NTN 32218U Taper Roller 90 mm ID Roller Bearing, 160 mm OD
- NTN 30218U Taper Roller 90 mm ID Roller Bearing, 160 mm OD