SKF 30221 Taper 105 mm ID Roller Bearing, 190 mm OD
- RS-stocknr.:
- 207-9988
- Fabrikantnummer:
- 30221
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 278,49
(excl. BTW)
€ 336,97
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 25 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 278,49 |
*prijsindicatie
- RS-stocknr.:
- 207-9988
- Fabrikantnummer:
- 30221
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 105mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| End Type | Shielded | |
| Outside Diameter | 190mm | |
| Static Load Rating | 368kN | |
| Cup Width | 30mm | |
| Number of Rows | 1 | |
| Cone Width | 40mm | |
| Bearing Material | Steel | |
| Limiting Speed | 3400rpm | |
| Standards/Approvals | No | |
| Bearing Dynamic Load Rating | 282kN | |
| Bearing Type | Taper | |
| Race Type | Tapered | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 105mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
End Type Shielded | ||
Outside Diameter 190mm | ||
Static Load Rating 368kN | ||
Cup Width 30mm | ||
Number of Rows 1 | ||
Cone Width 40mm | ||
Bearing Material Steel | ||
Limiting Speed 3400rpm | ||
Standards/Approvals No | ||
Bearing Dynamic Load Rating 282kN | ||
Bearing Type Taper | ||
Race Type Tapered | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- FAG 30221-A Taper Roller 105 mm ID Roller Bearing, 190 mm OD
- RS PRO 30221 Taper 105 mm ID Roller Bearing, 190 mm OD
- SKF 32221 Taper 105 mm ID Roller Bearing, 190 mm OD
- NTN 32221U Taper Roller 105 mm ID Taper Roller Bearing, 190 mm OD
- SKF 32038 X Taper Roller 190 mm ID Taper Roller Bearing, 290 mm OD
- SKF 31318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 32318 Taper 90 mm ID Roller Bearing, 190 mm OD
- SKF 30318 Taper 90 mm ID Roller Bearing, 190 mm OD