SKF 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- RS-stocknr.:
- 207-9997
- Fabrikantnummer:
- 30311
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 80,89
(excl. BTW)
€ 97,88
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 18 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 80,89 |
*prijsindicatie
- RS-stocknr.:
- 207-9997
- Fabrikantnummer:
- 30311
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Parallel | |
| Cage Material | Pressed Steel | |
| Cup Width | 25mm | |
| Static Load Rating | 167kN | |
| Bearing Dynamic Load Rating | 159kN | |
| End Type | Shielded | |
| Standards/Approvals | No | |
| Number of Rows | 1 | |
| Bearing Material | Steel | |
| Cone Width | 31.5mm | |
| Outside Diameter | 120mm | |
| Limiting Speed | 5600rpm | |
| Race Type | Tapered | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Parallel | ||
Cage Material Pressed Steel | ||
Cup Width 25mm | ||
Static Load Rating 167kN | ||
Bearing Dynamic Load Rating 159kN | ||
End Type Shielded | ||
Standards/Approvals No | ||
Number of Rows 1 | ||
Bearing Material Steel | ||
Cone Width 31.5mm | ||
Outside Diameter 120mm | ||
Limiting Speed 5600rpm | ||
Race Type Tapered | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- NTN 4T-30311 Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- RS PRO 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 22311 E/VA405 Taper 55 mm ID Roller Bearing, 120 mm OD
- NTN 4T-30311D Taper Roller 55 mm ID Taper Roller Bearing, 120 mm OD
- SKF 32224/DF Taper Roller 120 mm ID Taper Roller Bearing, 215 mm OD
- SKF T4CB 120 Taper 120 mm ID Roller Bearing, 170 mm OD