SKF 32311 J2 Taper 55 mm ID Roller Bearing, 120 mm OD
- RS-stocknr.:
- 208-0184
- Fabrikantnummer:
- 32311 J2
- Fabrikant:
- SKF
Subtotaal (1 eenheid)*
€ 107,44
(excl. BTW)
€ 130,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 mei 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 107,44 |
*prijsindicatie
- RS-stocknr.:
- 208-0184
- Fabrikantnummer:
- 32311 J2
- Fabrikant:
- SKF
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | SKF | |
| Product Type | Roller Bearing | |
| Inside Diameter | 55mm | |
| Bore Type | Parallel | |
| End Type | Shielded | |
| Bearing Dynamic Load Rating | 245kN | |
| Standards/Approvals | No | |
| Series | 32311 | |
| Cone Width | 45.5mm | |
| Outside Diameter | 120mm | |
| Static Load Rating | 250kN | |
| Limiting Speed | 5600rpm | |
| Number of Rows | 1 | |
| Cup Width | 35mm | |
| Bearing Type | Taper | |
| Alles selecteren | ||
|---|---|---|
Merk SKF | ||
Product Type Roller Bearing | ||
Inside Diameter 55mm | ||
Bore Type Parallel | ||
End Type Shielded | ||
Bearing Dynamic Load Rating 245kN | ||
Standards/Approvals No | ||
Series 32311 | ||
Cone Width 45.5mm | ||
Outside Diameter 120mm | ||
Static Load Rating 250kN | ||
Limiting Speed 5600rpm | ||
Number of Rows 1 | ||
Cup Width 35mm | ||
Bearing Type Taper | ||
- Land van herkomst:
- DE
The SKF single row tapered roller bearings are designed to accommodate combined loads, i.e. simultaneously acting radial and axial loads. The projection lines of the raceways meet at a common point on the bearing axis to provide a true rolling action and therefore low frictional moments during operation. The axial load carrying capacity of tapered roller bearings increases with increasing contact angle α. The size of the contact angle, which is usually between 10° and 30°, is related to the calculation factor e the larger the value of e, the larger the contact angle.
Low friction
Enhanced operational reliability
Rigid bearing application
A single row tapered roller bearing is typically adjusted against a second tapered roller bearing. By applying a preload, a rigid bearing application can be achieved.
Running-in period with reduced temperature peaks
Separable and interchangeable
The inner ring with roller and cage assembly (cone) can be mounted separately from the outer ring (cup). Furthermore, the separable components (fig. 6) are interchangeable. This facilitates mounting, dismounting and also maintenance inspection routines.
Gerelateerde Links
- SKF 31311 J2/Q Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32211 J2/Q Taper 55 mm ID Roller Bearing, 100 mm OD
- SKF 30311 Taper 55 mm ID Roller Bearing, 120 mm OD
- SKF 32316 J2 Taper 80 mm ID Roller Bearing, 170 mm OD
- SKF 32317 J2 Taper 85 mm ID Roller Bearing, 180 mm OD
- SKF 30302 J2 Taper 15 mm ID Roller Bearing, 42 mm OD
- SKF 30222 J2 Taper 110 mm ID Roller Bearing, 200 mm OD
- SKF 30207 J2/Q Taper 35 mm ID Roller Bearing, 72 mm OD