ZANDER AACHEN ZLMS Grab Wire Switch 50 mm, Screw, 1 NO, 3 NC
- RS-stocknr.:
- 475-683
- Fabrikantnummer:
- 940050
- Fabrikant:
- ZANDER AACHEN
Subtotaal (1 eenheid)*
€ 511,57
(excl. BTW)
€ 619,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Voorradig bij de fabrikant
- Klaar voor verzending vanaf 30 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 511,57 |
*prijsindicatie
- RS-stocknr.:
- 475-683
- Fabrikantnummer:
- 940050
- Fabrikant:
- ZANDER AACHEN
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | ZANDER AACHEN | |
| Product Type | Grab Wire Switch | |
| Indicator Type | LED | |
| Mounting Orientation | Screw | |
| Contact Configuration | 1 NO, 3 NC | |
| IP Rating | IP69K, IP67 | |
| Number of Cable Entries | 3 | |
| Series | ZLMS | |
| E-Stop Button | Yes | |
| Contact AC Voltage | 240V ac | |
| Reset Button | Yes | |
| Minimum Operating Temperature | -25°C | |
| Contact DC Voltage | 24V dc | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 80°C | |
| Length | 50mm | |
| Housing Material | Stainless Steel | |
| Width | 74mm | |
| Standards/Approvals | ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | |
| Depth | 57mm | |
| Hazardous Area Certification | No | |
| Mechanical Life | 1.5Operations | |
| Conduit Entry | 3 x M20 | |
| Alles selecteren | ||
|---|---|---|
Merk ZANDER AACHEN | ||
Product Type Grab Wire Switch | ||
Indicator Type LED | ||
Mounting Orientation Screw | ||
Contact Configuration 1 NO, 3 NC | ||
IP Rating IP69K, IP67 | ||
Number of Cable Entries 3 | ||
Series ZLMS | ||
E-Stop Button Yes | ||
Contact AC Voltage 240V ac | ||
Reset Button Yes | ||
Minimum Operating Temperature -25°C | ||
Contact DC Voltage 24V dc | ||
Contact Current 3A | ||
Maximum Operating Temperature 80°C | ||
Length 50mm | ||
Housing Material Stainless Steel | ||
Width 74mm | ||
Standards/Approvals ISO 13850, IEC 60947-5-5, CE, TÜV, IEC 60947-5-1, EN 60204-1, EN 60947-5-1, EN 60947-5-5 | ||
Depth 57mm | ||
Hazardous Area Certification No | ||
Mechanical Life 1.5Operations | ||
Conduit Entry 3 x M20 | ||
- Land van herkomst:
- DE
The H.ZANDER Safety rope switches are designed to be mounted on machines and sections of conveyors, which cannot be protected by guards. Safety rope switches can initiate the emergency command from any point along the installed rope length. A red LED, which is visible from far off, indicates the switching status. The safety rope switch is also available with stainless steel housing.
Switches off by breakage or tension loss
Protect hazards up to 50 m
Rope tension indicator
Stainless steel housing IP69K
Gerelateerde Links
- ZANDER AACHEN ZLSE Rope Pull Switch 239 mm 3 NC/1 NO
- Telemecanique Sensors XY2CH Grab Wire Switch 19.5 cm 1 NO/1 NC
- ZANDER AACHEN ZCode Series Magnetic Non-Contact Safety Switch 24V dc 1 NO, M12
- Telemecanique Sensors XY2CE Grab Wire Switch, 1 NO/1 NC
- ABB LineStrong3D Grab Wire Switch 250 m, 4 NO/4 NC
- ABB LineStrong3DZ Grab Wire Switch 250 m, 4 NO/4 NC
- ZANDER AACHEN MINOS SL Safety Relay
- ZANDER AACHEN Bridge Rectifier, 250 V