Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS-stocknr.:
- 130-0874
- Fabrikantnummer:
- XY2CEDA190
- Fabrikant:
- Telemecanique Sensors
Subtotaal (1 eenheid)*
€ 593,70
(excl. BTW)
€ 718,38
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 2 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 593,70 |
*prijsindicatie
- RS-stocknr.:
- 130-0874
- Fabrikantnummer:
- XY2CEDA190
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Minimum Operating Temperature | -25°C | |
| Reset Button | Yes | |
| Contact DC Voltage | 250V dc | |
| Contact AC Voltage | 240V ac | |
| E-Stop Button | Yes | |
| Contact Current | 3A | |
| Maximum Operating Temperature | 70°C | |
| Depth | 142mm | |
| Length | 285mm | |
| Standards/Approvals | CCC, UL (NISD), CSA, EAC, EN/IEC 60947-5-5, UL 508, CSA C 22-2 | |
| Width | 106mm | |
| Housing Material | Stainless Steel | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | M20 | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Minimum Operating Temperature -25°C | ||
Reset Button Yes | ||
Contact DC Voltage 250V dc | ||
Contact AC Voltage 240V ac | ||
E-Stop Button Yes | ||
Contact Current 3A | ||
Maximum Operating Temperature 70°C | ||
Depth 142mm | ||
Length 285mm | ||
Standards/Approvals CCC, UL (NISD), CSA, EAC, EN/IEC 60947-5-5, UL 508, CSA C 22-2 | ||
Width 106mm | ||
Housing Material Stainless Steel | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry M20 | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Gerelateerde Links
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC
- Telemecanique Sensors Telemecanique Emergency Stop rope pull Switches XY2C Grab Wire Switch 2 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC