Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- RS-stocknr.:
- 130-0875
- Fabrikantnummer:
- XY2CEDA196H7
- Fabrikant:
- Telemecanique Sensors
Momenteel niet beschikbaar
Sorry, we weten niet wanneer dit weer voorradig zal zijn.
- RS-stocknr.:
- 130-0875
- Fabrikantnummer:
- XY2CEDA196H7
- Fabrikant:
- Telemecanique Sensors
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Telemecanique Sensors | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| IP Rating | IP66 | |
| Number of Cable Entries | 3 | |
| Series | XY2CE | |
| Minimum Operating Temperature | -25°C | |
| Contact Current | 3A | |
| Contact AC Voltage | 130V ac | |
| Reset Button | Yes | |
| E-Stop Button | Yes | |
| Contact DC Voltage | 130V dc | |
| Maximum Operating Temperature | 70°C | |
| Housing Material | Stainless Steel | |
| Depth | 142mm | |
| Width | 106mm | |
| Length | 285mm | |
| Standards/Approvals | CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | |
| Hazardous Area Certification | ATEX | |
| Mechanical Life | 60000Cycles | |
| Conduit Entry | 1/2 in NPT | |
| Alles selecteren | ||
|---|---|---|
Merk Telemecanique Sensors | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
IP Rating IP66 | ||
Number of Cable Entries 3 | ||
Series XY2CE | ||
Minimum Operating Temperature -25°C | ||
Contact Current 3A | ||
Contact AC Voltage 130V ac | ||
Reset Button Yes | ||
E-Stop Button Yes | ||
Contact DC Voltage 130V dc | ||
Maximum Operating Temperature 70°C | ||
Housing Material Stainless Steel | ||
Depth 142mm | ||
Width 106mm | ||
Length 285mm | ||
Standards/Approvals CSA, CSA C 22-2, UL (NISD), CCC, UL 508, EAC, EN/IEC 60947-5-5 | ||
Hazardous Area Certification ATEX | ||
Mechanical Life 60000Cycles | ||
Conduit Entry 1/2 in NPT | ||
Telemecanique XY2CED Emergency Stop Dual Rope Pull Switches
Telemecanique XY2CED emergency stop dual rope pull switches are designed to reduce the risk of injury to persons and damage either to machines or work in progress. These dual rope pull switches feature double anchor points and can support up to 2 x 100 m with supports and pulleys. They can be tripped by a single human action when a normal emergency stop function is not available and will also trip in the event of the tripwire breaking.
Features and Benefits
Switches incorporate positive opening operation contacts, the tripping of the switch being made with positive action
The switch latches in the tripped position (N/C safety contact(s) open). The function of the N/O contact is purely for signalling
Incorporates a reset button, which re-closes the safety contact(s), restarting of the machine must only be achieved by manual operation of a control device within the machine start circuit, remote to the trip wire switch
Recommended distance between cable supports is 15m
Gerelateerde Links
- Telemecanique Sensors XY2CE Rope Pull Switch 285 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NO/2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 2 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 229 mm, 1 NO/1 NC
- Telemecanique Sensors XY2CE Rope Pull Switch 142 mm 2 NC
- Telemecanique Sensors Telemecanique Emergency Stop rope pull Switches XY2C Grab Wire Switch 2 NC
- Telemecanique Sensors XY2C Series Cable Pull Rope Pull Switch IP66 240V ac, 3A