Craig & Derricott GWN Rope Pull Switch 209 mm, Straight, 2 NO/2 NC
- RS-stocknr.:
- 198-7396
- Fabrikantnummer:
- GWN2/SS
- Fabrikant:
- Craig & Derricott
Subtotaal (1 eenheid)*
€ 938,41
(excl. BTW)
€ 1.135,48
(incl. BTW)
Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 938,41 |
*prijsindicatie
- RS-stocknr.:
- 198-7396
- Fabrikantnummer:
- GWN2/SS
- Fabrikant:
- Craig & Derricott
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Craig & Derricott | |
| Product Type | Rope Pull Switch | |
| Contact Configuration | 2 NO/2 NC | |
| Indicator Type | Rope Tension | |
| Mounting Orientation | Straight | |
| IP Rating | IP65 | |
| Number of Cable Entries | 2 | |
| Series | GWN | |
| Contact DC Voltage | 24V dc | |
| Contact Current | 16A | |
| Contact AC Voltage | 415V ac | |
| E-Stop Button | Yes | |
| Reset Button | Yes | |
| Depth | 107.5mm | |
| Length | 209mm | |
| Standards/Approvals | ISO, EN | |
| Housing Material | Stainless Steel | |
| Width | 94mm | |
| Hazardous Area Certification | No | |
| Conduit Entry | M20 | |
| Mechanical Life | 1000000Operations | |
| Alles selecteren | ||
|---|---|---|
Merk Craig & Derricott | ||
Product Type Rope Pull Switch | ||
Contact Configuration 2 NO/2 NC | ||
Indicator Type Rope Tension | ||
Mounting Orientation Straight | ||
IP Rating IP65 | ||
Number of Cable Entries 2 | ||
Series GWN | ||
Contact DC Voltage 24V dc | ||
Contact Current 16A | ||
Contact AC Voltage 415V ac | ||
E-Stop Button Yes | ||
Reset Button Yes | ||
Depth 107.5mm | ||
Length 209mm | ||
Standards/Approvals ISO, EN | ||
Housing Material Stainless Steel | ||
Width 94mm | ||
Hazardous Area Certification No | ||
Conduit Entry M20 | ||
Mechanical Life 1000000Operations | ||
- Land van herkomst:
- GB
GWN Series, Grab Wire
Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines in various environments
Typical applications: - conveyors, assembly lines, transfer lines, packaging machinery, process equipment
Grabwire switches are a convenient way of installing two-rope pull switches on a long rope run, with common wiring and two heads
When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate
If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit
100M max span, each side
Ingress protection to IP65 as standard
Sealed M20 cable entries
Safety and auxiliary contacts as standard 2N/C + 1N/O
To comply with BS 5304 switch units should be fitted at each end of the grabwire
To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements
Please order the appropriate kit for length for your installation from the RS Rope kits for grabwire switches
Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304
Note
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757
Stock No typ 239-6757
Gerelateerde Links
- Craig & Derricott GWN Rope Pull Switch 214.5 mm 2 NO/2 NC
- Craig & Derricott GWN Rope Pull Switch 184 mm 1 NO/2 NC
- Craig & Derricott GWD Rope Pull Switch 285 mm 2 NO/2 NC
- Craig & Derricott
- Craig & Derricott 2-Pole Isolator Switch -
- Siemens 3SE7 Rope Pull Switch 209 mm 1 NO/3 NC
- Craig & Derricott Switch Disconnector Shaft 265 mm, SS Series
- Craig & Derricott 2-Pole Isolator Switch -, IP66