Craig & Derricott GWD Rope Pull Switch 285 mm, Straight, 2 NO/2 NC

RS-stocknr.:: 511-7175
Fabrikantnummer:: GWDE/RS
Fabrikant:: Craig & Derricott

Craig & Derricott GWD Rope Pull Switch 285 mm, Straight, 2 NO/2 NC

Subtotaal (1 eenheid)*

€ 1.165,75

(excl. BTW)

€ 1.410,56

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Voorradig bij de fabrikant

Klaar voor verzending vanaf 09 juli 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 1.165,75

*prijsindicatie

RS-stocknr.:: 511-7175
Fabrikantnummer:: GWDE/RS
Fabrikant:: Craig & Derricott

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Craig & Derricott
	Product Type	Rope Pull Switch
	Indicator Type	Rope Tension
	Mounting Orientation	Straight
	Contact Configuration	2 NO/2 NC
	IP Rating	IP65
	Series	GWD
	E-Stop Button	Yes
	Reset Button	Yes
	Contact AC Voltage	250V ac
	Contact Current	16A
	Contact DC Voltage	24V dc
	Depth	110mm
	Width	94mm
	Standards/Approvals	ISO, EN
	Length	285mm
	Housing Material	Steel
	Hazardous Area Certification	No
	Mechanical Life	1000000Operations
	Conduit Entry	M20

	Alles selecteren
	Merk Craig & Derricott
	Product Type Rope Pull Switch
	Indicator Type Rope Tension
	Mounting Orientation Straight
	Contact Configuration 2 NO/2 NC
	IP Rating IP65
	Series GWD
	E-Stop Button Yes
	Reset Button Yes
	Contact AC Voltage 250V ac
	Contact Current 16A
	Contact DC Voltage 24V dc
	Depth 110mm
	Width 94mm
	Standards/Approvals ISO, EN
	Length 285mm
	Housing Material Steel
	Hazardous Area Certification No
	Mechanical Life 1000000Operations
	Conduit Entry M20

Land van herkomst:: GB

GWD Series, Double Grab Wire

Designed to offer grabwire switch protection for personnel working in close proximity to conveyors or rotating and moving machines

Typical applications:- conveyors, assembly lines, transfer lines, packaging machinery, process equipment

Double grabwire switches are a convenient way of installing two rope pull switches on a long rope run, with common wiring and two heads

When the units are correctly installed and set, the system switching contacts are closed allowing the system to operate

If the grabwire is pulled the switch contacts will open, providing operator safety. Whether the grabwire has been pulled, gone slack or been broken, it can only be started by manually resetting the switch unit

100M max span, each side

Ingress protection to IP65 as standard

Sealed M20 cable entries

Safety and auxiliary contacts as standard 2 N/C + 2 N/O (each side)

To comply with BS 5304 switch units should be fitted at each end of the grabwire

To complete an installation a connection kit is required, containing the wire rope, instruction leaflet and all other necessary elements

Please order the appropriate kit for length for your installation from the RS Rope setting kits for grabwire switches

Standards & Approvals BS EN 60947-5-1, BS EN 60947-5-5, BS 5304

Note

To comply with safety standards, a switch unit should be fitted at each end of the grab wire to afford system and operator protection.
Our rope switch kits contain all fittings necessary for installation. Available in 5, 10, 20, 30, 50 and 75 metre lengths.
Stock No typ 239-6757

Craig & Derricott GWD Rope Pull Switch 285 mm, Straight, 2 NO/2 NC

GRATIS bezorging voor bestellingen van meer dan € 90,00

GWD Series, Double Grab Wire

Note

Gerelateerde Links

Wees als eerste op de hoogte van onze nieuwste producten en aanbiedingen