SICK I150 Rope Pull Switch 203 mm, 2 NC/2 NO

RS-stocknr.:: 285-9586
Fabrikantnummer:: I150-RP223 / 6024884
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 194,93

(excl. BTW)

€ 235,87

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

23 stuk(s) klaar voor verzending
Plus verzending 5 stuk(s) vanaf 11 november 2026
Plus verzending 3 stuk(s) vanaf 02 december 2026

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 194,93

*prijsindicatie

RS-stocknr.:: 285-9586
Fabrikantnummer:: I150-RP223 / 6024884
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Rope Pull Switch
	Contact Configuration	2 NC/2 NO
	IP Rating	IP65
	Number of Cable Entries	3
	Series	I150
	Contact AC Voltage	240V ac
	Contact Current	3A
	Contact DC Voltage	24V dc
	Minimum Operating Temperature	-25°C
	Maximum Operating Temperature	80°C
	Length	203mm
	Depth	69mm
	Housing Material	Metal
	Standards/Approvals	China RoHS, cULus, EU DoC, IEC, UKCA
	Width	85mm
	Hazardous Area Certification	No
	Conduit Entry	M20
	Mechanical Life	106Cycles

	Alles selecteren
	Merk SICK
	Product Type Rope Pull Switch
	Contact Configuration 2 NC/2 NO
	IP Rating IP65
	Number of Cable Entries 3
	Series I150
	Contact AC Voltage 240V ac
	Contact Current 3A
	Contact DC Voltage 24V dc
	Minimum Operating Temperature -25°C
	Maximum Operating Temperature 80°C
	Length 203mm
	Depth 69mm
	Housing Material Metal
	Standards/Approvals China RoHS, cULus, EU DoC, IEC, UKCA
	Width 85mm
	Hazardous Area Certification No
	Conduit Entry M20
	Mechanical Life 106Cycles

Land van herkomst:: DO

SICK I150 Series Rope Pull Switch, 203mm Length, Metal Housing - I150-RP223 / 6024884

This rope pull switch provides a manual safety command solution for industrial operations where a pull-cord emergency stop is required. Designed for heavy-duty environments, it features a die-cast lightweight metal enclosure with a varnished finish and an ingress protection rating suitable for exposed locations. The unit interfaces via three M20 cable glands and is intended to be integrated with a separate safety logic unit for fault monitoring.

Features and Benefits:

• IP65-rated enclosure for protection in harsh environments
• 2NC and 2NO contacts delivering positive-action switching
• Rated for 3A at 240V AC and 2A at 24V DC switching
• Mechanical life rated to 1e6 switching cycles for longevity
• Operates across -25 to 80°C for varied ambient conditions

Applications

• Suitable for emergency-stop rope switch installations on conveyors
• Used for perimeter pull-cord guarding on production lines
• Ideal for long-span pull-cord systems up to 75m length
• Used with machine-safety logic units for diagnostic monitoring
• Suitable for integration where multiple cable entries are required

How is the device connected electrically?

It accepts conductors up to 1.5mm² via three M20 cable entries using cable glands.

What contact behaviour should be expected during actuation?

The device uses slow-action switching elements with positive-action N/C and N/O contacts.

How is fault detection handled in a safety circuit?

The switch has no internal fault detection and relies on the connected safety-related logic unit for diagnostics.

What are the insulation and withstand ratings for electrical stress?

The rated insulation voltage is Ui 250V and the impulse withstand voltage is Uimp 2,500V.