SICK I12 Safety Switch, Fibreglass Reinforced Thermoplastic

RS-stocknr.:: 285-1829
Fabrikantnummer:: i12-SB215
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 62,62

(excl. BTW)

€ 75,77

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

3 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 62,62

*prijsindicatie

RS-stocknr.:: 285-1829
Fabrikantnummer:: i12-SB215
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Switch
	Actuator Included	No
	Safety Contacts	2 NC
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	I12
	Contact AC Voltage	230V ac
	IP Rating	IP67
	Minimum Operating Temperature	-20°C
	Switch Contact Current	2A
	Contact DC Voltage	24V dc
	Maximum Operating Temperature	80°C
	Hazardous Area Certification	No
	Length	104mm
	Standards/Approvals	IEC 60529
	Width	38.4mm
	Number of Head Directions	5
	Depth	31mm

	Alles selecteren
	Merk SICK
	Product Type Safety Switch
	Actuator Included No
	Safety Contacts 2 NC
	Housing Material Fibreglass Reinforced Thermoplastic
	Series I12
	Contact AC Voltage 230V ac
	IP Rating IP67
	Minimum Operating Temperature -20°C
	Switch Contact Current 2A
	Contact DC Voltage 24V dc
	Maximum Operating Temperature 80°C
	Hazardous Area Certification No
	Length 104mm
	Standards/Approvals IEC 60529
	Width 38.4mm
	Number of Head Directions 5
	Depth 31mm

Datasheet - i12-SB215

Land van herkomst:: DO

SICK I12 Series Safety Switch, 2 NC Safety Contacts, IP67 - i12-SB215

This safety switch is an electro-mechanical interlock designed to monitor access points in industrial systems. It provides two positive-action normally closed contacts for safety circuits, connects via a 4-pin M12 plug, and is intended for environments where dust and water ingress protection is required. The unit operates across a wide ambient temperature range and is suited to applications requiring diagnostic-capable series connection.

Features and Benefits:

• 2A rated contact current delivering 24V DC control capability
• IP67 enclosure rating enabling protection against dust and water
• Fibreglass reinforced thermoplastic housing offering Durable protection
• Five selectable head directions allowing flexible actuator approach
• Safe series connection with diagnostic Flexi Loop support

Applications

• Suitable for guarding on assembly line access panels
• Ideal for integration with safety logic units in machinery
• Used with control cabinets requiring M12 plug connections
• Can be used for perimeter safety on packaging machines
• Used for monitoring removable guards in manufacturing cells

What type of electrical switching does it provide?

It uses slow-action switching elements with positive-action N/C contacts for safety-circuit integrity.

How should fault detection be implemented with this device?

Fault detection must be handled by the connected safety-related logic unit as the switch lacks internal fault self-monitoring.

What mechanical lifetime can be expected under small loads?

The switching element is specified for 1,000,000 mechanical cycles with a B10d parameter of 2x10^6 switching cycles.

What connection and supply ratings are required for integration?

It connects via a 4-pin M12 plug and supports 2A at 24V DC and contact voltages up to 230V AC.

Are there any hazardous-area certifications for this unit?

The device is not certified for use in hazardous areas.