SICK i110 Safety Switch, Power, Fibreglass Reinforced Thermoplastic

RS-stocknr.:: 285-1817
Fabrikantnummer:: i110-E0233
Fabrikant:: SICK

Subtotaal (1 eenheid)*

€ 269,67

(excl. BTW)

€ 326,30

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

1 stuk(s) klaar voor verzending

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 269,67

*prijsindicatie

RS-stocknr.:: 285-1817
Fabrikantnummer:: i110-E0233
Fabrikant:: SICK

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	SICK
	Product Type	Safety Switch
	Lock Style	Power
	Actuator Included	No
	Housing Material	Fibreglass Reinforced Thermoplastic
	Series	i110
	IP Rating	IP67
	Contact DC Voltage	24V dc
	Contact AC Voltage	230V ac
	Minimum Operating Temperature	-20°C
	Switch Contact Current	4A
	Hazardous Area Certification	No
	Maximum Operating Temperature	55°C
	Standards/Approvals	IEC 60529
	Length	190mm
	Number of Head Directions	5
	Depth	40mm
	Width	42mm

	Alles selecteren
	Merk SICK
	Product Type Safety Switch
	Lock Style Power
	Actuator Included No
	Housing Material Fibreglass Reinforced Thermoplastic
	Series i110
	IP Rating IP67
	Contact DC Voltage 24V dc
	Contact AC Voltage 230V ac
	Minimum Operating Temperature -20°C
	Switch Contact Current 4A
	Hazardous Area Certification No
	Maximum Operating Temperature 55°C
	Standards/Approvals IEC 60529
	Length 190mm
	Number of Head Directions 5
	Depth 40mm
	Width 42mm

Datasheet - i110-E0233

Land van herkomst:: DE

SICK i110 Series Safety Switch, 4A Switch Contact Current, IP67 - i110-E0233

This safety switch is a power-to-lock device designed to secure guarded access points in industrial automation. It provides electro-mechanical monitoring of locking and door positions and is intended for individually wired safety circuits with diagnostic capability. The unit is offered without an actuator and is housed in a glass-fibre reinforced thermoplastic enclosure rated for protection against dust and water ingress.

Features and Benefits:

• 4A rated contact current gives compatibility with common control voltages
• Power-to-lock operation provides secure retention when energised
• 2,500N maximum locking force supports high-force retention needs
• IP67 enclosure rating permits washdown and dusty environments
• Five approach directions enable flexible actuator alignment

Applications

• Suitable for safeguarding machine guards with diagnostic monitoring
• Ideal for installation where washdown resistance is required
• Used for access control on production lines needing high retaining force
• Can be used for individually wired safety circuits with logic units
• Suitable for sites requiring compact, externally mounted lock devices

What electrical voltages does it support?

It switches at 230V AC and 24V DC with 4A rated current.

How is fault handling managed?

It has no internal fault-state capability

connected safety logic must detect faults.

What environmental temperature range does it tolerate?

It operates between -20°C and +55°C.

What type of connection is provided for cabling?

Three M20 cable gland entries accept conductors from 0.34mm² to 1.5mm².

Is an actuator supplied with the unit?

No actuator is supplied

actuators are ordered separately.