Schneider Electric Preventa, 24V ac/dc Safety Relay, 5 Safety Contacts

These modules are available in addition to base modules such as emergency stop, limit switch, two-hand control and much more. When using the XPSUAT as a base module, the configuration is used to choose whether the XPSUEP's outputs follow the XPSUAT's immediate or time delay outputs.

• The start input follows the host modules

• Zero safety inputs, extension bus

• 4 NO + 2 single NC safety outputs

• The connection is achieved via the base module by connector

• 1 solid-state diagnostic output with complete status information

• Removable terminal blocks for the connection type

• 16 terminals

• Predominantly used for extending the number of safety contacts

• Safety levels: Can reach PL e/category 4 for normally open relay contact conforming to ISO 13849-1, Can reach SILCL 3 for normally open relay contact conforming to IEC 62061, Can reach SIL 3 for normally open relay contact conforming to IEC 61508, Can reach PL c/category 1 for normally closed relay contact conforming to ISO 13849-1, Can reach SILCL 1 for normally closed relay contact conforming to IEC 62061 and Can reach SIL 1 for normally closed relay contact conforming to IEC 61508

• Has a rated supply voltage of 24 V AC - 15...10 % and 24 V DC - 20...20 %

• Internal and electronic input protection type

• Input compatibilities are: Normally closed circuit, XC limit switch, Mechanical contact, Normally closed circuit, Antivalent pair, OSSD pair and 3-wire proximity sensors

• Power consumption:1.5W 24V DC

• Safety outputs:4 NO redundant, 2 NC single

• Conventional free air thermal current:8A