Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Winbond
	Product Type	SDRAM
	Memory Size	2GB
	Organisation	256M x 8 bit
	Data Bus Width	16bit
	Address Bus Width	17bit
	Number of Bits per Word	8
	Maximum Clock Frequency	533MHz
	Maximum Random Access Time	0.4ns
	Number of Words	256M
	Mount Type	Surface
	Package Type	WBGA
	Minimum Operating Temperature	-40°C
	Pin Count	84
	Maximum Operating Temperature	95°C
	Width	8.1mm
	Length	12.6mm
	Series	W972GG6KB
	Standards/Approvals	RoHS
	Height	0.6mm
	Minimum Supply Voltage	1.7V
	Maximum Supply Voltage	1.9V
	Automotive Standard	No
	Supply Current	280mA

	Alles selecteren
	Merk Winbond
	Product Type SDRAM
	Memory Size 2GB
	Organisation 256M x 8 bit
	Data Bus Width 16bit
	Address Bus Width 17bit
	Number of Bits per Word 8
	Maximum Clock Frequency 533MHz
	Maximum Random Access Time 0.4ns
	Number of Words 256M
	Mount Type Surface
	Package Type WBGA
	Minimum Operating Temperature -40°C
	Pin Count 84
	Maximum Operating Temperature 95°C
	Width 8.1mm
	Length 12.6mm
	Series W972GG6KB
	Standards/Approvals RoHS
	Height 0.6mm
	Minimum Supply Voltage 1.7V
	Maximum Supply Voltage 1.9V
	Automotive Standard No
	Supply Current 280mA

The W972GG6KB is a 2G bits DDR2 SDRAM, and speed involving -18, -25/25I, and -3/-3I.

Double Data Rate architecture: two data transfers per clock cycle

CAS Latency: 3, 4, 5, 6 and 7

Burst Length: 4 and 8

Bi-directional, differential data strobes (DQS and /DQS ) are transmitted / received with data

Edge-aligned with Read data and center-aligned with Write data

DLL aligns DQ and DQS transitions with clock

Differential clock inputs (CLK and /CLK)

Data masks (DM) for write data

Commands entered on each positive CLK edge, data and data mask are referenced to both edges of /DQS

Posted /CAS programmable additive latency supported to make command and data bus efficiency

Read Latency = Additive Latency plus CAS Latency (RL = AL + CL)

Off-Chip-Driver impedance adjustment (OCD) and On-Die-Termination (ODT) for better signal quality

Auto-precharge operation for read and write bursts

Auto Refresh and Self Refresh modes

Precharged Power Down and Active Power Down

Write Data Mask

Write Latency = Read Latency - 1 (WL = RL - 1)

Interface: SSTL_18

Winbond W972GG6KB25I SDRAM 2 GB Surface, 84-Pin 16 bit WBGA

Gerelateerde Links