Lapp Female 8 way Straight to Unterminated 8 way Unterminated Sensor/Actuator Connector, 500 mm

RS-stocknr.:: 362-321
Fabrikantnummer:: 381166922
Fabrikant:: Lapp

Lapp Female 8 way Straight to Unterminated 8 way Unterminated Sensor/Actuator Connector, 500 mm

Bulkkorting beschikbaar

Bekijk bulkkorting

Subtotaal (1 eenheid)*

€ 9,41

(excl. BTW)

€ 11,39

(incl. BTW)

Informatie over voorraden is momenteel niet toegankelijk - Controleer het later nog eens opnieuw

Aantal stuks	Per stuk
1 - 9	€ 9,41
10 - 24	€ 8,66
25 +	€ 7,64

*prijsindicatie

RS-stocknr.:: 362-321
Fabrikantnummer:: 381166922
Fabrikant:: Lapp

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	Lapp
	Product Type	Sensor/Actuator Connector
	Series	EPIC M12
	Jacket Material	Nickel Plated Brass, Nitrile Rubber (NBR)
	Cable Length	500mm
	Number of Contacts A	8
	Connector Type A	Straight
	Connector Gender A	Female
	Connector Gender B	Unterminated
	Number of Contacts B	8
	Connector Type B	Unterminated
	Voltage	30V
	Standards/Approvals	DIN EN 61076-2-101
	IP Rating	IP67
	Coding	A

	Alles selecteren
	Merk Lapp
	Product Type Sensor/Actuator Connector
	Series EPIC M12
	Jacket Material Nickel Plated Brass, Nitrile Rubber (NBR)
	Cable Length 500mm
	Number of Contacts A 8
	Connector Type A Straight
	Connector Gender A Female
	Connector Gender B Unterminated
	Number of Contacts B 8
	Connector Type B Unterminated
	Voltage 30V
	Standards/Approvals DIN EN 61076-2-101
	IP Rating IP67
	Coding A

Datasheet - 381166922

Land van herkomst:: DE

Lapp EPIC M12 Series Circular Connector, 0.5m Cable Length, IP67 Ingress Protection - 381166922

This circular connector is designed for providing a secure electrical link between a female, straight M12 interface and an unterminated cable end in industrial environments. It operates at low control voltages and is intended for outdoor and harsh settings where ingress protection is required. The connector adopts A-coding and accommodates eight contact positions to support multi-signal connections.

Features and Benefits:

• IP67 rating delivers waterproofing for wet conditions
• Eight contact positions enable multi-conductor signal transmission
• A-coded interface ensures standardised pin assignment compatibility
• Straight female configuration simplifies inline cable routing
• 30V rated insulation supports low-voltage control systems
• 0.5m cable length offers ready-to-install reach

Applications

• Suitable for sensor arrays requiring multiple signal lines
• Ideal for factory automation control cabling
• Used with fieldbus or I/O modules needing A-coded connectors
• Can be used for outdoor instrumentation linking to controllers
• Used for temporary installations where unterminated cable ends are finished on site

How is the unterminated end intended to be handled during installation?

The free cable end is prepared on site for termination to terminal blocks, glands or soldered connections according to the installer’s wiring scheme.

Which environmental conditions can it withstand besides immersion protection?

The IP67 sealing provides protection against dust ingress and immersion up to 1m for temporary submersion, suitable for splash and wash-down scenarios.

What electrical loading is suitable for connected circuits?

The connector is specified for circuits operating up to 30V, appropriate for control and signal-level applications.