Weller ETC 3.2 mm Chisel Shape 34.5 mm Soldering Iron Tip for use with LR20, WEP70, LR21 (old generation)
- RS-stocknr.:
- 179-706
- Artikelnummer Distrelec:
- 182-64-830
- Fabrikantnummer:
- 4ETC-1
- Fabrikant:
- Weller
Subtotaal (1 eenheid)*
€ 6,55
(excl. BTW)
€ 7,93
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 46 stuk(s) klaar voor verzending
- 562 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 6,55 |
*prijsindicatie
- RS-stocknr.:
- 179-706
- Artikelnummer Distrelec:
- 182-64-830
- Fabrikantnummer:
- 4ETC-1
- Fabrikant:
- Weller
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Weller | |
| Tip Shape | Chisel Shape | |
| Product Type | Soldering Iron Tip | |
| Model Number | ETC | |
| For Use With | LR20, WEP70, LR21 (old generation) | |
| Tip Series | ET | |
| Tip Width | 3.2 mm | |
| Tip Length | 34.5mm | |
| Standards/Approvals | UPC | |
| Alles selecteren | ||
|---|---|---|
Merk Weller | ||
Tip Shape Chisel Shape | ||
Product Type Soldering Iron Tip | ||
Model Number ETC | ||
For Use With LR20, WEP70, LR21 (old generation) | ||
Tip Series ET | ||
Tip Width 3.2 mm | ||
Tip Length 34.5mm | ||
Standards/Approvals UPC | ||
- Land van herkomst:
- MX
Weller Soldering Iron Tip, 34.5mm Tip Length, 3.2mm Tip Width - 4ETC-1
This soldering iron tip is a chisel‑shaped replacement designed for precision heat transfer in professional soldering stations. It fits older handheld and bench units and is intended for tasks requiring controlled solder distribution and repeatable joint formation in industrial and laboratory environments.
Features and Benefits:
• Chisel profile improves solder wetting and joint coverage
• 3.2mm width delivers consistent thermal contact area
• 34.5mm length offers extended reach in confined assemblies
• UPC approval ensures adherence to recognised safety marking
• Compatible with legacy tool interfaces for straightforward swaps
• 3.2mm width delivers consistent thermal contact area
• 34.5mm length offers extended reach in confined assemblies
• UPC approval ensures adherence to recognised safety marking
• Compatible with legacy tool interfaces for straightforward swaps
Applications
• Suitable for repetitive through‑hole assembly in electronics production
• Ideal for maintenance of automation control boards and connectors
• Used with WEP70‑compatible soldering stations in repair benches
• Can be used for refurbishment of older LR20 handpieces in workshops
• Used for component replacement on legacy LR21 equipment
• Ideal for maintenance of automation control boards and connectors
• Used with WEP70‑compatible soldering stations in repair benches
• Can be used for refurbishment of older LR20 handpieces in workshops
• Used for component replacement on legacy LR21 equipment
How does the tip affect heat delivery during precision soldering?
The chisel geometry concentrates thermal mass along a broad edge, enabling even heat transfer across joint surfaces while maintaining temperature stability under typical bench soldering loads.
Will it fit different tool handles without modification?
It is intended for direct insertion into compatible older‑generation handpieces and bench irons constructed to the same interface, allowing replacement without adaptor parts when matched correctly.
What maintenance practice preserves performance?
Regular cleaning of oxidised residues and periodic re‑tinning after use reduces thermal resistance and prolongs effective thermal conduction.
How does the tip assist in working within tight component arrays?
The combination of its elongated profile and flat working face permits access between closely spaced parts while still presenting sufficient contact area for reliable solder flow.
Gerelateerde Links
- Weller ETCS 3.2 mm Round Blunt 34.5 mm Soldering Iron Tip for use with LR20 WEP70
- Weller ETSL 34.5 mm Screwdriver Soldering Iron Tip for use with WEP70 LR20
- Weller ETF 1.2 mm Bevel 34.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller ETB 2.4 mm Screwdriver 34.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller ETAA 1.6 mm Bevel 34.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller ETE 5.6 mm Screwdriver 34.5 mm Soldering Iron Tip for use with LR21 (old generation) LR20
- Weller ETAA 1.6 mm Chisel 34.5 mm Soldering Iron Tip for use with LR20 LR21 (old generation)
- Weller ETF 1.2 mm Bevel 34.5 mm Soldering Iron Tip for use with WEP70 LR21 (old generation)