TE Connectivity, MiniSeal Butt Wire Splice Connector, Blue, Insulated, Nickel 12 AWG
- RS-stocknr.:
- 782-4822
- Fabrikantnummer:
- D-200-83
- Fabrikant:
- TE Connectivity
Bulkkorting beschikbaar
Bekijk bulkkortingSubtotaal (1 eenheid)*
€ 9,92
(excl. BTW)
€ 12,00
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 29 april 2027
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 - 4 | € 9,92 |
| 5 - 24 | € 9,65 |
| 25 - 74 | € 9,38 |
| 75 + | € 9,14 |
*prijsindicatie
- RS-stocknr.:
- 782-4822
- Fabrikantnummer:
- D-200-83
- Fabrikant:
- TE Connectivity
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | TE Connectivity | |
| Splice Type | Butt | |
| Product Type | Wire Splice Connector | |
| Overall Length | 14.86mm | |
| Minimum Wire Size AWG | 26AWG | |
| Diameter | 3.89mm | |
| Maximum Wire Size AWG | 12AWG | |
| Insulation | Insulated | |
| Colour | Blue | |
| Insulation Material | Modified Fluoropolymer | |
| Series | MiniSeal | |
| Contact Material | Copper Alloy | |
| Contact Plating | Nickel | |
| Termination Type | Crimp | |
| Standards/Approvals | SAE-AS81824/1 (modified for 200˚C), SAE-AMS-DTL-23053/13, EN 3373-014 | |
| Alles selecteren | ||
|---|---|---|
Merk TE Connectivity | ||
Splice Type Butt | ||
Product Type Wire Splice Connector | ||
Overall Length 14.86mm | ||
Minimum Wire Size AWG 26AWG | ||
Diameter 3.89mm | ||
Maximum Wire Size AWG 12AWG | ||
Insulation Insulated | ||
Colour Blue | ||
Insulation Material Modified Fluoropolymer | ||
Series MiniSeal | ||
Contact Material Copper Alloy | ||
Contact Plating Nickel | ||
Termination Type Crimp | ||
Standards/Approvals SAE-AS81824/1 (modified for 200˚C), SAE-AMS-DTL-23053/13, EN 3373-014 | ||
TE Connectivity D-200 MiniSeal Crimp Splices
D-200 MiniSeal immersion resistant crimp splices with a nickel plating for use in high temperature applications of up to 200°C. These D-2100 MiniSeal splices have heat-shrinkable transparent blue radiation cross-linked modified fluoropolymer insulation sleeves for environmental protection and strain relief, meltable thermoplastic rings and nickel plated (SAE AMS-QQ-N-290) copper alloy (101 or 102 per ASTM B75) splice barrels. Suitable applications for these D-200 MiniSeal splices include aerospace and defence applications and for protecting and sealing RCW and BMS13-60 nickel-plated wires.
Stock number 782-4831 is for use with a wire range of 26-20 AWG and is colour coded red
Stock number 782-4822 is for use with a wire range of 20-16 AWG and is colour coded blue
Stock number 782-4828 is for use with a wire range of 16-12 AWG and is colour coded yellow
For suitable crimp tool see stock number 444-5693
Splices
Standards
Specification Control Document D-200-82/-83/-84
Met or exceeded the following requirements successfully: SAE-AMS-DTL-23053/13 (applies only to insulation sleeve), SAE-AS81824/1 (modified for 200˚C applications)
Under qualification for EN 3373-014
Met or exceeded the following requirements successfully: SAE-AMS-DTL-23053/13 (applies only to insulation sleeve), SAE-AS81824/1 (modified for 200˚C applications)
Under qualification for EN 3373-014