Festo EMMS-ST Series Hybrid Stepper Motor 48V, 0.5Nm Torque, 1.8 °, 5 mm Shaft
- RS-stocknr.:
- 181-6679
- Artikelnummer Distrelec:
- 301-68-719
- Fabrikantnummer:
- EMMS-ST-42-S-SE-G2
- Fabrikant:
- Festo
Momenteel niet beschikbaar
We weten niet of dit item nog op voorraad komt, RS is van plan dit binnenkort uit ons assortiment te halen.
Alternatief
Dit product is momenteel niet beschikbaar. Hierbij onze aanbeveling voor een alternatief product.
Per stuk
€ 254,56
(excl. BTW)
€ 308,02
(incl. BTW)
- RS-stocknr.:
- 181-6679
- Artikelnummer Distrelec:
- 301-68-719
- Fabrikantnummer:
- EMMS-ST-42-S-SE-G2
- Fabrikant:
- Festo
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Festo | |
| Product Type | Stepper Motor | |
| Sub Type | Hybrid | |
| Step Angle | 1.8° | |
| Holding Torque | 0.5Nm | |
| Voltage | 48V | |
| Shaft Diameter | 5mm | |
| Current Rating | 1.8A | |
| IP Rating | IP54 | |
| Shaft Length | 24mm | |
| Depth | 94mm | |
| Standards/Approvals | IEC 60034 | |
| Resistance Per Phase | 1.75Ω | |
| Output Speed | 1740rpm | |
| Series | EMMS-ST | |
| Alles selecteren | ||
|---|---|---|
Merk Festo | ||
Product Type Stepper Motor | ||
Sub Type Hybrid | ||
Step Angle 1.8° | ||
Holding Torque 0.5Nm | ||
Voltage 48V | ||
Shaft Diameter 5mm | ||
Current Rating 1.8A | ||
IP Rating IP54 | ||
Shaft Length 24mm | ||
Depth 94mm | ||
Standards/Approvals IEC 60034 | ||
Resistance Per Phase 1.75Ω | ||
Output Speed 1740rpm | ||
Series EMMS-ST | ||
- Land van herkomst:
- CN
Festo Hybrid Stepper Motor, 48V DC, 1740rpm - EMMS-ST-42-S-SE-G2
Accurately control motor movements with this hybrid stepper motor from Festo. Precise and repeatable stepping ability makes this unit ideal for speed control and positioning applications. It gives you enhanced dexterity and efficiency for your programmed actions and is able to move a fraction of a rotation at a time for applications that need minute accuracy. The motor's 2-phase hybrid technology offers high driving torque for improved power. Thanks to optimised connection technology, the unit is quick and simple to hook up to a controller.
• Shaft is held in position even after the power supply is disconnected for improved reliability
• Needs less energy to reach a given torque for improved power efficiency
• IP54 (ingress protection) rated motor housing and plug connection mean it's protected against dust and water sprays
• Resistant to corrosion for an extended service life
Applications
• Robotics
• Process automation
• Printing and scanning
• Camera platforms
What is a hybrid stepper motor?
A hybrid stepper motor is a type of DC (direct current) motor that combines a high torque-to-size ratio and fast output speed with quiet operation. It's easy to install and allows micro-stepping techniques that increase the fixed number of steps within a motor for smooth and accurate operation.
Gerelateerde Links
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 11 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 6.35 mm Shaft
- Festo EMMS-ST Series Hybrid Stepper Motor 48V 1.8 °, 5 mm Shaft
- Festo For Use With CMMS-ST Motor Controller EMMS-ST-57 Stepper Motor