- RS-stocknr.:
- 181-6691
- Fabrikantnummer:
- EMMS-ST-87-S-SE-G2
- Fabrikant:
- Festo
Tijdelijk niet op voorraad – nieuwe voorraad verwacht op 06-06-2024, met een levertijd van 1 werkdag.
Toegevoegd
Prijs Per stuk
€ 573,77
(excl. BTW)
€ 694,26
(incl. BTW)
Aantal stuks | Per stuk |
1 - 4 | € 573,77 |
5 + | € 566,51 |
- RS-stocknr.:
- 181-6691
- Fabrikantnummer:
- EMMS-ST-87-S-SE-G2
- Fabrikant:
- Festo
Wetgeving en compliance
- Land van herkomst:
- CN
Productomschrijving
Festo Stepper Motor, 2Nm Brake Holding Torque, 9.5A Motor Current - EMMS-ST-87-S-SE-G2
For on-point rotation of your pneumatic equipment, choose this stepper motor from Festo. It works by splitting a turning cycle into repeatable 1.8° pulses, so it's suitable for applications that need precise positioning. Thanks to 2-phase hybrid technology, it has the power of two motors in one so you can rely on it to do double duty. The lightweight unit has a mass of just 2.1kg, meaning it's easy to handle during installation and won't put a strain on your equipment.
Features & Benefits
• Wide operating temperature range between -10°C and +50°C for use in demanding conditions
• IP54 rating indicates it can withstand dust and water jet splashes from all directions
• 48V rating makes it suitable for use in low-voltage settings
• Integrated incremental encoder for accurate position control
• IP54 rating indicates it can withstand dust and water jet splashes from all directions
• 48V rating makes it suitable for use in low-voltage settings
• Integrated incremental encoder for accurate position control
Applications
• Pharmaceutical production plants
• Robotics and automation systems
• Labelling machines
• Robotics and automation systems
• Labelling machines
What's the output speed of this stepper motor?
The component delivers an output speed of up to 2130rpm, so it's compatible with fast-paced applications.
How do I link this stepper motor to my equipment's control station?
It comes with two adapters – one 15-pin connector for the device itself and an 8-pin connector for the encoder.
Specificaties
Kenmerk | Waarde |
---|---|
Stepper Motor Type | Hybrid |
Step Angle | 1.8° |
Holding Torque | 2.5Nm |
Supply Voltage | 48 V |
Shaft Diameter | 11mm |
Current Rating | 9.5 A |
Shaft Length | 27mm |
Depth | 112.6mm |
Resistance Per Phase | 0.1Ω |
Output Speed | 2130 rpm |
Standards Met | CE Certified, cULus |
Series | EMMS-ST |