Tedea Huntleigh Model 1042 Series Low Profile Load Cell, 1 kg, Compression Measure, 50 kg
- RS-stocknr.:
- 185-6002
- Fabrikantnummer:
- 01042-050K-C3-23X
- Fabrikant:
- Tedea Huntleigh
Subtotaal (1 eenheid)*
€ 92,69
(excl. BTW)
€ 112,15
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 4 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 92,69 |
*prijsindicatie
- RS-stocknr.:
- 185-6002
- Fabrikantnummer:
- 01042-050K-C3-23X
- Fabrikant:
- Tedea Huntleigh
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tedea Huntleigh | |
| Product Type | Load Cell | |
| Force Measured | Compression | |
| Series | Model 1042 | |
| Sensor Type | Low Profile | |
| Terminal Type | Cable | |
| Mount Type | Hole | |
| IP Rating | IP66 | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 25.4mm | |
| Minimum Force/Load Measurement | 1kg | |
| Minimum Operating Temperature | -30°C | |
| Maximum Force/Load Measurement | 50kg | |
| Maximum Operating Temperature | 70°C | |
| Standards/Approvals | OIML R60, FM, RoHS Compliant, ATEX, IECEX, NTEP | |
| Depth | 25.4mm | |
| Length | 40mm | |
| Alles selecteren | ||
|---|---|---|
Merk Tedea Huntleigh | ||
Product Type Load Cell | ||
Force Measured Compression | ||
Series Model 1042 | ||
Sensor Type Low Profile | ||
Terminal Type Cable | ||
Mount Type Hole | ||
IP Rating IP66 | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 25.4mm | ||
Minimum Force/Load Measurement 1kg | ||
Minimum Operating Temperature -30°C | ||
Maximum Force/Load Measurement 50kg | ||
Maximum Operating Temperature 70°C | ||
Standards/Approvals OIML R60, FM, RoHS Compliant, ATEX, IECEX, NTEP | ||
Depth 25.4mm | ||
Length 40mm | ||
Model 1042 is a low profile single-point load cell designed for direct mounting in weighing platforms. Its small physical size, combined with high accuracy and low cost, makes this load cell ideally suited for retail, bench and counting scales. Capacities of 5 kg and above are supplied as standard in anodized Aluminium. A humidity resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of changes in lead resistance due to temperature change and/or cable extenstion, is achieved by feeding this voltage into the appropriate electronics.
Capacities 1–200 kg
Aluminium construction
Single-point 400 x 400 mm platform
High stiffness version available for dynamic weighing applications
Applications
Bench scales
Counting scales
Grocery scales
Gerelateerde Links
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 200 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series Low Profile Load Cell Compression Measure, 20 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series S Type Load Cell Compression Measure, 3 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 5 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω