Tedea Huntleigh Model 1250 Series Single Point Load Cell, 50 kg, Compression Measure, 1500 kg
- RS-stocknr.:
- 185-6015
- Fabrikantnummer:
- 01250-150K-C3-06X
- Fabrikant:
- Tedea Huntleigh
Subtotaal (1 eenheid)*
€ 276,27
(excl. BTW)
€ 334,29
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Tijdelijk niet op voorraad
- Verzending vanaf 26 oktober 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 276,27 |
*prijsindicatie
- RS-stocknr.:
- 185-6015
- Fabrikantnummer:
- 01250-150K-C3-06X
- Fabrikant:
- Tedea Huntleigh
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tedea Huntleigh | |
| Force Measured | Compression | |
| Product Type | Load Cell | |
| Series | Model 1250 | |
| Sensor Type | Single Point | |
| Terminal Type | Cable | |
| IP Rating | IP65 | |
| Mount Type | Direct | |
| Maximum AC Voltage | 15V ac | |
| Maximum DC Voltage | 15V dc | |
| Housing Material | Aluminium | |
| Width | 80.4mm | |
| Minimum Force/Load Measurement | 50kg | |
| Minimum Operating Temperature | -20°C | |
| Maximum Force/Load Measurement | 1500kg | |
| Maximum Operating Temperature | 70°C | |
| Length | 75.4mm | |
| Standards/Approvals | OIML R60, EEx ia IIC T4, NTEP, RoHS Compliant, FM | |
| Depth | 80.4mm | |
| Alles selecteren | ||
|---|---|---|
Merk Tedea Huntleigh | ||
Force Measured Compression | ||
Product Type Load Cell | ||
Series Model 1250 | ||
Sensor Type Single Point | ||
Terminal Type Cable | ||
IP Rating IP65 | ||
Mount Type Direct | ||
Maximum AC Voltage 15V ac | ||
Maximum DC Voltage 15V dc | ||
Housing Material Aluminium | ||
Width 80.4mm | ||
Minimum Force/Load Measurement 50kg | ||
Minimum Operating Temperature -20°C | ||
Maximum Force/Load Measurement 1500kg | ||
Maximum Operating Temperature 70°C | ||
Length 75.4mm | ||
Standards/Approvals OIML R60, EEx ia IIC T4, NTEP, RoHS Compliant, FM | ||
Depth 80.4mm | ||
Model 1250 is a single-point load cell designed for direct mounting of large platforms. The product is a cost-effective load cell for use on counting, weighing, bench or floor scale products. Suitable for use in hazardous environments. A special humidity-resistant protective coating assures long-term stability over the entire compensated temperature range. The two additional sense wires, sample the bridge supply voltage at the load cell. Complete compensation of change in the lead wires resistance, due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics.
Capacities 50–1500 kg
Aluminium construction
Aluminium construction
Single-point 800 x 800 mm platform
Applications
Large platform scales
Hanging scales
Check weighing
Gerelateerde Links
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 1500 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure, 500 kg
- Tedea Huntleigh Models 616 Series Load Cell Compression Measure, 150 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 350Ω
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 350Ω
- Tedea Huntleigh Models 620 Series Load Cell Load Cell Compression Measure, 5 t
- Tedea Huntleigh Model 9363 Series Load Cell Compression Measure, 500 kg