RS PRO Low Profile Load Cell, Compression Measure, 500 kg

RS-stocknr.:: 204-2764
Fabrikant:: RS PRO

Subtotaal (1 eenheid)*

€ 316,40

(excl. BTW)

€ 382,84

(incl. BTW)

GRATIS bezorging voor bestellingen van meer dan € 90,00

Op voorraad

Plus verzending 27 stuk(s) vanaf 14 september 2026
Plus verzending 20 stuk(s) vanaf 06 januari 2027

Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.

Aantal stuks	Per stuk
1 +	€ 316,40

*prijsindicatie

RS-stocknr.:: 204-2764
Fabrikant:: RS PRO

Specificaties

Datasheets

Wetgeving en compliance

Productomschrijving

Zoek vergelijkbare producten door een of meer kenmerken te selecteren.

Alles selecteren	Attribuut	Waarde
	Merk	RS PRO
	Product Type	Load Cell
	Force Measured	Compression
	Sensor Type	Low Profile
	IP Rating	IP66
	Maximum DC Voltage	10V dc
	Housing Material	Stainless Steel
	Width	54mm
	Gauge Length	76mm
	Maximum Force/Load Measurement	500kg
	Minimum Operating Temperature	-20°C
	Maximum Operating Temperature	60°C
	Standards/Approvals	OIML, RoHS
	Depth	25mm
	Length	76mm

	Alles selecteren
	Merk RS PRO
	Product Type Load Cell
	Force Measured Compression
	Sensor Type Low Profile
	IP Rating IP66
	Maximum DC Voltage 10V dc
	Housing Material Stainless Steel
	Width 54mm
	Gauge Length 76mm
	Maximum Force/Load Measurement 500kg
	Minimum Operating Temperature -20°C
	Maximum Operating Temperature 60°C
	Standards/Approvals OIML, RoHS
	Depth 25mm
	Length 76mm

Land van herkomst:: CN

RS PRO Stainless Steel S Beam Load Cell

RS PRO gives you the brilliant S Beam Load Cell. Made from stainless steel for a load cell that is tough and reliable for even the harshest industrial utilisation. These S beam load cells have been specially designed by RS PRO for testing of tension and compression and bi-directional testing applications. Made to be a perfect tool to aid you in a wide range of measurement applications.

Features and Benefits

S beam load cell has rated capacity of 5/50/100/150/200/300/500KGs meaning it will cover a variety of different loads

Low profile so the load cell does not take up too much room or be cumbersome in your workplace

Accuracy class of C3 widely used in machine construction so the load cell complies with requirements specified exactly for a multitude of factors that are critical to the quality of the measurement result

The load cell has an operating temperature of -20°C to 60°C making if perfect for a wide range of environments

The load cell is made from stainless steel with nickel-plated treatment giving you a tough and durable product

Protection class of IP68 meaning that your S-beam cell is dust, dirt, sand and water resistant

The S beam load cell is easy to install, stable and reliable

Non-linearity - 0.02%R.O

Applications

Load cells are transducers that transform a force, for example, tension, compression or torque into an electrical signal, this is then measured and standardised. S type load cells are specially designed for compression and tension applications and used in a variety of industries for example:

Hopper Scales

Crane Scales

Tension control

Machine testing

Batching systems

Blending and Mixing systems

Belt Scales

Process Weighing Applications

Why RS PRO?

RS Pro is our family brand to go-to and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.