Tedea Huntleigh Model 1042 Series Single Point Load Cell, 1 kg, Compression Measure, 100 kg, 415Ω
- RS-stocknr.:
- 443-8229
- Fabrikantnummer:
- 1042-0100-F000-RS
- Fabrikant:
- Tedea Huntleigh
Subtotaal (1 eenheid)*
€ 120,57
(excl. BTW)
€ 145,89
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- 5 stuk(s) klaar voor verzending vanaf een andere locatie
- Plus verzending 7 stuk(s) vanaf 04 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 120,57 |
*prijsindicatie
- RS-stocknr.:
- 443-8229
- Fabrikantnummer:
- 1042-0100-F000-RS
- Fabrikant:
- Tedea Huntleigh
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | Tedea Huntleigh | |
| Force Measured | Compression | |
| Product Type | Load Cell | |
| Series | Model 1042 | |
| Gauge Resistance | 415Ω | |
| Sensor Type | Single Point | |
| Terminal Type | Wire | |
| IP Rating | IP66 | |
| Mount Type | Hole | |
| Maximum DC Voltage | 15V dc | |
| Maximum AC Voltage | 15V ac | |
| Housing Material | Aluminium | |
| Width | 25.4mm | |
| Minimum Force/Load Measurement | 1kg | |
| Maximum Force/Load Measurement | 100kg | |
| Minimum Operating Temperature | -10°C | |
| Maximum Operating Temperature | 40°C | |
| Length | 40mm | |
| Depth | 25.4mm | |
| Standards/Approvals | OIML, NTEP | |
| Alles selecteren | ||
|---|---|---|
Merk Tedea Huntleigh | ||
Force Measured Compression | ||
Product Type Load Cell | ||
Series Model 1042 | ||
Gauge Resistance 415Ω | ||
Sensor Type Single Point | ||
Terminal Type Wire | ||
IP Rating IP66 | ||
Mount Type Hole | ||
Maximum DC Voltage 15V dc | ||
Maximum AC Voltage 15V ac | ||
Housing Material Aluminium | ||
Width 25.4mm | ||
Minimum Force/Load Measurement 1kg | ||
Maximum Force/Load Measurement 100kg | ||
Minimum Operating Temperature -10°C | ||
Maximum Operating Temperature 40°C | ||
Length 40mm | ||
Depth 25.4mm | ||
Standards/Approvals OIML, NTEP | ||
Vrijgesteld
Low Profile Aluminium
Compensated Temperature Range -10 to +40°C
Output Impedance 350 +/- 3Ω
Termination Type: Cable
Ultimate Overload: 300% of Rated Load
1042 series low profile single point load cell designed for direct mounting of low cost weighing platforms. Has a humidity resistant protective coating, which assures long term stability over the entire compensated temperature range.
Dimensions: 20 x 40 x 150mm (1 to 30kg); 25.2 x 40 x 150mm (50 to 100kg)
Please also browse our range of output signal conditioners
Gerelateerde Links
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 7 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 30 kg
- Tedea Huntleigh Model 1042 Series S Type Load Cell Compression Measure, 3 kg
- Tedea Huntleigh Model 1042 Series Single Point Load Cell Compression Measure, 5 kg
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 415Ω
- Tedea Huntleigh Model 1250 Series Single Point Load Cell Compression Measure 350Ω