Recom Switching Regulator, Through Hole, 3.3 V dc Output Voltage 32V dc, 2 A Output Current, 1 Outputs

Bekijk alle Switching Regulators
Bulkkorting beschikbaar

Subtotaal (1 eenheid)*

€ 11,69

(excl. BTW)

€ 14,14

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Tijdelijk niet op voorraad
  • Verzending 24 stuk(s) vanaf 23 maart 2026
  • Plus verzending 42 stuk(s) vanaf 02 juli 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 - 4€ 11,69
5 - 9€ 11,34
10 - 24€ 10,98
25 - 49€ 10,64
50 +€ 10,29

*prijsindicatie

Verpakkingsopties
RS-stocknr.:
139-2950
Artikelnummer Distrelec:
304-10-487
Fabrikantnummer:
R-78B3.3-2.0
Fabrikant:
Recom
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Recom

Product Type

Switching Regulator

Output Voltage 1

3.3 V dc

Output Current

2A

Mount Type

Through Hole

Number of Outputs

1

Power

6.6W

Efficiency

0.92%

Ripple and Noise

50mV Pk-Pk

Minimum Operating Temperature

-40°C

Maximum Operating Temperature

70°C

Number of Pins

3

Series

R-78B-2.0

Package Type

SIP-3

Line Regulation

±0.5 %

Width

8.5 mm

Length

11.5mm

Depth

8.5mm

Standards/Approvals

EN 55022, IEC/EN 62368-1, CB Report

Weight

4g

Maximum Input Voltage

32V dc

Load Regulation

±1 %

MTBF

6349000h

Minimum Input Voltage

4.75V

Land van herkomst:
TW

RECOM Switching Regulator, 92% Maximum Efficiency, 50mV Ripple Voltage - R-78B-2.0 Series - R-78B3.3-2.0


Got a supply voltage and attached components that don't see eye to eye? Put this switching regulator from RECOM in the middle to give your equipment the power it needs. By adapting input voltages between 4.75 and 32V DC to a steady 3.3V DC output, it brings supplies into line and makes them widely compatible. With a 92% maximum efficiency rating, the unit cuts out waste power during conversion to keep your system working efficiently. The regulator doesn't hang around – it starts up in just 10ms so you can GET to work.

• Built-in overtemperature and short-circuit protection to protect your system against faults

• Line regulation rating of ±0.5%, so its output voltage stays stable

• Ripple voltage of 50mV to minimise disruption from electrical noise

• Wide operating temperature range between -40°C and +70°C for use in tough industrial environments

Applications


• Digital cameras

• Office and school buildings

• Building surveyance

How do I install this switching regulator?


You can install this unit on your PCB using through-hole mounting. Simply insert the built-in pins into pre-drilled holes on your board and solder them to the underside.

R78Bxx 2.0 Series Switching Regulator


The Recom R-78Bxx series are highly efficient, non-isolated switching regulators. They offer a high-quality product at a low cost in production quantity. They are ideally suited to replace 78xx linear regulators, as well as being pin compatible.

The convertor has a high-voltage input range and there is no need for heat sinks, due to little energy being wasted. It has a wide input range with continuous short circuit protection and no external components are needed to work efficiently.

Features and Benefits


• Wide operating temperature of -40 to +70 °C at full load

• Pin compatible with TO220 linear regulators

• High efficiency, non-isolated, no need for heatsinks

• Requires no external components

• Continuous short circuit protection

• Low ripple and noise

• Compact size, ensuring space saving

• Positive to negative converter

Gerelateerde Links