Fluke calibration 9102S/RS-256 Temperature Calibrator

Bekijk alle Temperature Calibrators

Subtotaal (1 eenheid)*

€ 4.015,76

(excl. BTW)

€ 4.859,07

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Beperkte voorraad
  • Plus verzending 2 stuk(s) vanaf 23 februari 2026
  • Plus verzending 6 stuk(s) vanaf 23 februari 2026
  • Plus verzending 1 stuk(s) vanaf 13 april 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 4.015,76

*prijsindicatie

RS-stocknr.:
537-048
Fabrikantnummer:
9102S/RS-256
Fabrikant:
Fluke calibration
Land van herkomst:
US

FLUKE Temperature Calibrator, Two-Well Type, -10°C to +122°C Measurement Temperature - 9100 Series - 9102S/RS-256


Need to prioritise precision when configuring your instruments? Set them up with this temperature calibrator from FLUKE. It's a dry-well type, so it comes with an internal heat source that gives off a thermal reading when you insert a probe into it. As it features two wells, it pulls double duty and lets you use one well as a reference point for increased accuracy. When it's time to adjust your dial gauges, digital thermometers and bulb switches, use this handy tool to keep your appliances in line.

• Deep well depth of 102mm to handle long probes

• Wide temperature setting range between -10°C and +122°C for use with demanding applications

• High accuracy of ±0.25°C for results you can count on

Applications


• Water plants

• Chemical factories

• Manufacturing industry

• Medical technology

What's the heating and cooling time of this calibrator?


The component has a rapid ambient heating time of 10 minutes to a temperature of +100°C, so you won't be left hanging around waiting to take readings. It takes just 10 minutes to cool back down to 0°C.

Fluke 9102S Hand Held Temperature Drywell


A drywell offering a combination of extreme portability and good performance to meet the requirements associated with high speed, high volume industrial calibrations in a shop floor environment. Use the instruments independently or together to make fast zero and span calibrations of temperature sensors.

Drywell ideal for checking dial gauges, digital thermometers, bulb switches, and other sensors that need calibration below ambient.

Fast and easy calibrations of temperature sensors

Temperature range –10°C to 122°C, expandable to –10 °C to 375 °C when used with a 9100S drywell (see stock no. 537-026)

2 x 1/2 “ dia wells enabling one can be used for a reference thermometer to increase accuracy. Inserts are available to suit other sensor sizes.

Direct interface to the Fluke 744 Documenting Process Calibrator

Fluke 9100 Series Drywell Heat Sources


Note

For inserts to accept 1/8” dia. sensor see stock no. 537-000
For inserts to accept 1/4” dia. sensor see stock no. 537-010
For inserts to accept 3/8” dia. sensor see stock no. 537-016
For 9102S carry case see stock no. 537-054

Supplied with

Power Cord, User's Guide with Report of Calibration, RS-232 Cable, 9930 Interface-it Software and User's Guide

Gerelateerde Links

Recently viewed