RS PRO 1241057 DIN Rail On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac Single Set Point Control, On-Off
- RS-stocknr.:
- 124-1057
- Artikelnummer Distrelec:
- 304-02-634
- Fabrikant:
- RS PRO
Subtotaal (1 eenheid)*
€ 93,12
(excl. BTW)
€ 112,68
(incl. BTW)
GRATIS bezorging voor bestellingen van meer dan € 90,00
Op voorraad
- Plus verzending 16 stuk(s) vanaf 01 juni 2026
- Plus verzending 128 stuk(s) vanaf 01 juni 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks | Per stuk |
|---|---|
| 1 + | € 93,12 |
*prijsindicatie
- RS-stocknr.:
- 124-1057
- Artikelnummer Distrelec:
- 304-02-634
- Fabrikant:
- RS PRO
Specificaties
Datasheets
Wetgeving en compliance
Productomschrijving
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren | Attribuut | Waarde |
|---|---|---|
| Merk | RS PRO | |
| Output Type | Relay | |
| Product Type | On-Off Temperature Controller | |
| Number of Inputs | 1 | |
| Number of Outputs | 1 | |
| Maximum Current | 8A | |
| Minimum Operating Temperature | 0°C | |
| Maximum Operating Temperature | 50°C | |
| Terminal Type | Screw | |
| Control Type | Single Set Point Control, On-Off Control, Hysteresis, Heating Control, Cooling Control | |
| Maximum Supply Voltage | 253V ac | |
| Digital Comms | Baudrate | |
| Maximum Voltage | 250V ac | |
| Display Type | 7 Segment LED | |
| Width | 54mm | |
| Length | 94mm | |
| IP Rating | IP65 | |
| Standards/Approvals | EN 61326-1: 2013, EN 61010-1: 2010, EN60715, CE | |
| Mount Type | DIN Rail | |
| Input Type | NTC | |
| Series | 1241057 | |
| Panel Depth | 68mm | |
| Alles selecteren | ||
|---|---|---|
Merk RS PRO | ||
Output Type Relay | ||
Product Type On-Off Temperature Controller | ||
Number of Inputs 1 | ||
Number of Outputs 1 | ||
Maximum Current 8A | ||
Minimum Operating Temperature 0°C | ||
Maximum Operating Temperature 50°C | ||
Terminal Type Screw | ||
Control Type Single Set Point Control, On-Off Control, Hysteresis, Heating Control, Cooling Control | ||
Maximum Supply Voltage 253V ac | ||
Digital Comms Baudrate | ||
Maximum Voltage 250V ac | ||
Display Type 7 Segment LED | ||
Width 54mm | ||
Length 94mm | ||
IP Rating IP65 | ||
Standards/Approvals EN 61326-1: 2013, EN 61010-1: 2010, EN60715, CE | ||
Mount Type DIN Rail | ||
Input Type NTC | ||
Series 1241057 | ||
Panel Depth 68mm | ||
- Land van herkomst:
- TR
RS PRO DIN Rail Temperature Controller
Ideal for use with NTC sensors from our RS PRO range. Featuring built in On/Off or pulse output status, it can be used for heating or cooling control. Easy to configure and install, with a large clear display giving good visibility alongside a compact design.
Features and Benefits:
• DIN Rail mounting
• Control output for cooling or heating
• Single NTC input
• Offset value can be entered for NTC probe
• Probe failure setting, output status can be set to On, Off or Pulse
• Sensor input offset setting
• High and low set point limits
• Temperature units ˚C or ˚F
• CE Certified
Typical Applications:
On/Off temperature controllers are designed to control and maintain temperatures in appliances by turning on or off, depending on the users required pre-set temperature. If the temperature drops below the setpoint, the controller will turn on and increase the temperature until it is met. Once the desired temperature is reached, the device output switches off automatically. Temperature controllers are perfect for applications that require temperature control solutions, especially those whereby the temperature increases slowly, and are commonly used in areas such as:
HVAC systems
Ovens
Incubators
Automotive
Storage solutions
FAQs
Why use an On/Off Temperature Controller?
Used for monitoring purposes in heating environments, on-off temperature controllers prevent rapid increases in temperature that could cause damage. These controllers are often used where there isn't a need for precision temperature control, but where a system is unable to handle continuous interruptions. A typical example of an on-off controller is a thermostat in a system, if the temperature drops below the preset level the system is switched on. They can protect against a system over-heating or over-cooling and have an 'on' 'off' option with no middle state.
Why RS PRO?
RS PRO is our family brand and brings you a wide range of high-quality and high-value products to support your project. Trusted by engineers all over the world, every part of every RS PRO product is always rigorously tested against demanding industry standards. We are only giving the RS PRO seal of approval if we're confident of their exceptional quality, which means you can be convinced too.
Gerelateerde Links
- RS PRO ET2001 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac On-Off
- RS PRO ET2411 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac On-Off
- RS PRO ET2412 Panel Mount On-Off Temperature Controller 1 Input, 2 Output Relay 253V ac On-Off
- RS PRO ET2411 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 253V ac/dc On-Off
- RS PRO EDT2411 Panel Mount On-Off Temperature Controller 1 Input, 1 Output Relay 230V ac Single Set Point Control
- RS PRO 124-1044 Panel Mount On-Off Temperature Controller, 1 Output Relay 253V ac
- RS PRO EDT2423 Panel Mount On-Off Temperature Controller 2 Input, 3 Output Relay 253V ac/dc Controller
- RS PRO Panel Mount On-Off Temperature Controller 1 Input, 2 Output Solid State Relay 253V ac PID Controller