P.M.A KS Panel PID Temperature Controller, 4 Output Relay 260V On-Off

Subtotaal (1 eenheid)*

€ 758,12

(excl. BTW)

€ 917,33

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • Plus verzending 1 stuk(s) vanaf 23 maart 2026
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 758,12

*prijsindicatie

RS-stocknr.:
607-9248
Fabrikantnummer:
KS92-112-0000D-011
Fabrikant:
P.M.A
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

P.M.A

Product Type

PID Temperature Controller

Output Type

Relay

Number of Outputs

4

Minimum Operating Temperature

0°C

Maximum Operating Temperature

60°C

Control Type

On-Off

Maximum Supply Voltage

260V

Diagnostics

Internal Fault, Eeprom, Latched Limit Messages, Sensor Break Or Short Circuit, Fault During Self-Tuning, Basic Diagnostic Functions, Maintenance Interval Of Actuator, Control Loop Alarm, Maintenance Manager and Error List, Re-Calibration Warning, Heating Current Alarm

Auxiliary Power Supply

22 mA, 18 V

Digital Comms

PROFIBUS-DP Interface, RS422/RS485/Modbus RTU

Maximum Voltage

250V

Display Type

LED, Multi Line

Standards/Approvals

EN 61326-1 EMC, cULus, EN 61010-1 (VDE 0411-1), EN 14597 (replaces DIN 3440)

Length

118mm

Width

48 mm

IP Rating

IP65, IP20, IP00

Input Type

Thermocouple, Potentiometer, Current, Voltage, Inp2, Universal Input

Series

KS

Mount Type

Panel

Panel Depth

118mm

Vrijgesteld

Land van herkomst:
GB

PMA KS 92-1 Temperature Controller


The KS 92-1 process controller is suitable for universal, precise, and cost-effective control. The instrument provides simple 2-point (on/off) control, continuous PID control, or 3-point stepping control.

The process value signal is connected via a universal input. A supplementary analogue input can be used for heating current measurement, as an external set-point inputter for position feedback measurement of motorised stepping controllers.

The optional 3rd input is a universal input that can be used for several functions, e.g. temperature dependent setpoint correction or differential control. The standard KS 92-1 is suitable for oxygen control using heated and unheated O2 sensors.

The KS 92-1 is particularly suited to the following applications: Furnaces and ovens, Burners and boilers, Plastics processing & Driers.

• BluePort®

• Front interface and BlueControl software

• Maintenance manager and error list

• Two universal inputs

• Day & Night display shows plain text and bargraphs

• Manual gain scheduling

• Self-Tuning to the setpoint without oscillation

• Valve controller with position feedback and DAC monitoring

• 3-point controller for water, fan and oil cooling

• Type tested to EN 14597 (replaces DIN 3440) and cULus

• High-impedance mV input for O2 sensors

PMA Temperature Controllers


Gerelateerde Links