Eurotherm EPack DIN Rail Controller, 1 Output 1 NE, De-Energised On Alarm Relay, Alarm Relay 500V ac/dc Threshold Limit

Afbeelding representeert productcategorie

Bekijk alle Temperature Controllers

Subtotaal (1 eenheid)*

€ 862,61

(excl. BTW)

€ 1.043,76

(incl. BTW)

Add to Basket
selecteer of typ hoeveelheid
Op voorraad
  • 1 stuk(s) klaar voor verzending vanaf een andere locatie
Heeft u meer nodig? Klik op 'Controleer leverdata' voor extra voorraad en levertijden.
Aantal stuks
Per stuk
1 +€ 862,61

*prijsindicatie

RS-stocknr.:
790-3619
Fabrikantnummer:
EPACK-1PH/32A/24V/XXX/V2
Fabrikant:
Eurotherm
Zoek vergelijkbare producten door een of meer kenmerken te selecteren.
Alles selecteren

Merk

Eurotherm

Product Type

Controller

Output Type

1 NE, De-Energised On Alarm Relay, Alarm Relay

Number of Outputs

1

Maximum Current

63A

Minimum Operating Temperature

0°C

Maximum Operating Temperature

45°C

Terminal Type

Plug

Control Type

Threshold Limit Control (Pa Reduction), True Power Control, Open-Loop Control with Feedforward+Trim, I² Control, Proportional Limit Control (by transfer V²↔I² or P↔I²), V² Control

Maximum Supply Voltage

500V ac/dc

Energy measurement

Yes

Auxiliary Power Supply

100 to 500 V

Digital Comms

Ethernet Dual Port/Modbus TCP

Firing Mode

Fixed Burst Firing, Variable Burst Firing, Phase Angle, Intelligent Half Cycle

Diagnostics

Partial Load Failure, Over-Voltage, Continuous Monitors and Detects Fault Conditions Including Short Circuit

Display Type

1.5 in TFT Colour

Maximum Voltage

500V

Width

121 mm

IP Rating

IP20, IP10

Standards/Approvals

CE, GOST-R, IEC 60947-4-3, CCC, cUL, UL

Length

48mm

Mount Type

DIN Rail

Input Type

0 to 20 mA, 2 to 10 V, 0 to 10 V, Contact, 4 to 20 mA, One Configurable Analogue Input 0 to 5 V, Digital Input

Series

EPack

Panel Depth

136.2mm

Niet conform

Land van herkomst:
PL

EPack - Compact SCR Power Controller


EPack power controller is a compact fully featured power controller, combining a high level of functionality and configurability with simplicity of setup and operation. The combination of advanced configurable firing modes allows close matching to load characteristics for maximum process efficiency. EPack is highly configurable and may be adapted for current and future needs using a software key to purchase additional functionality when needed.

Nominal load current from 32A (Stock-no.: 790-3619 & 800-6716) and 63A (Stock-no.: 790-3612 & 800-6725)

24V & 500V versions available

Analogue input signal (voltage and current)

High definition 1.5" TFT display

Configurable via iTools (PC software) or front panel

V2, I2 or true power control

Energy usage measurement

Advanced load diagnostics

Integrated dual port Ethernet switch for “daisy chained” communications

Plug and play Ethernet communications with Zero configuration networking

Modbus® TCP protocol

Compact DIN Rail and bulkhead Mounting Format

Gerelateerde Links