Sensirion Temperature & Humidity Sensor, Digital Output, Surface Mount, Serial-I2C, ±3 %RH, ±3°C, 6 Pins
- RS-stocknr.:
- 169-1839
- Fabrikantnummer:
- SHT20-TR-1.5kS
- Fabrikant:
- Sensirion
Bekijk deze categorie
tijdelijk niet op voorraad – nieuwe voorraad verwacht op 12-12-2023, met een levertijd van 2 à 3 werkdagen.
Prijs Each (On a Reel of 1500)
€ 3,741
(excl. BTW)
€ 4,527
(incl. BTW)
Aantal stuks | Per stuk | Per reel* |
1500 + | € 3,741 | € 5.611,50 |
*prijsindicatie |
- RS-stocknr.:
- 169-1839
- Fabrikantnummer:
- SHT20-TR-1.5kS
- Fabrikant:
- Sensirion
Wetgeving en compliance
- Land van herkomst:
- CH
Productomschrijving
SHT2x Digital Humidity & Temperature Sensors
The Sensirion SHT2x series of DFN digital humidity & temperature sensors are CMOSens® based. They are an industry standard, widely used humidity and temperature sensor. Humidity is measured using a capacitive sensor while temperature is measured using a band-gap sensor.
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy
The SHT2x sensors also contain a version 4 silicon chip with an amplifier, A/D converter, OTP memory and a digital interface. They come in a plastic package which leaves the sensor area open, protecting the devices from external impact and providing long-term stability.
SHT2x sensors are ideal for both high and low volume applications.
The SHT21P has a PWM output and the SHT21S has a PDM output; these can be converted into analogue outputs by the use of suitable low-pass filters.
SHT20 - Low cost, SHT21 - Standard, SHT25 - High Accuracy
CMOSens® based technology
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
Fully calibrated
I²C serial interface (Not SHT21P/SHT21S)
Digital output
Low power consumption
Long-term stability
Supply voltage range: 2.1 to 3.6 V
The following sensors are available:
Temperature & Humidity Sensors, Sensirion
Specificaties
Kenmerk | Waarde |
Sensor Function | Temperature & Humidity |
Output Type | Digital |
Interface Type | Serial-I2C |
Accuracy | ±3 %RH, ±3°C |
Mounting Type | Surface Mount |
Pin Count | 6 |
Minimum Operating Temperature | -40 °C |
Operating Temperature Range | -40 to +125 °C |
Maximum Operating Temperature | +125 °C |
Minimum Operating Supply Voltage | 2.1 V |
Maximum Operating Supply Voltage | 3.6 V |
Package Type | DFN |
Length | 3mm |
Height | 1.1mm |
Width | 3mm |
Resolution | 0.01 (Temperature) °C @ 14 bit, 0.04 (Humidity) %RH @ 12 bit, 0.04 (Temperature) °C @ 12 bit, 0.7 (Humidity) %RH @ 8 bit |
Dimensions | 3 x 3 x 1.1mm |